When to replace the Brake Pads on your MERCEDES-BENZ SPRINTER
Recommended replacement interval for the part category Brake pad set : 30000 km
Important!
This replacement procedure can be used for:
MERCEDES-BENZ SPRINTER 3,5-t Box (906) 319 CDI / BlueTEC 4x4 (906.631, 906.633, 906.635,..., MERCEDES-BENZ SPRINTER 3,5-t Box (906) 313 CDI (906.631, 906.633, 906.635, 906.637), MERCEDES-BENZ SPRINTER 3,5-t Box (906) 313 CDI 4x4 (906.631, 906.633, 906.635, 906.637), MERCEDES-BENZ SPRINTER 3,5-t Box (906) 324 (906.633, 906.635, 906.637), MERCEDES-BENZ SPRINTER 3,5-t Box (906) 311 CDI (906.631, 906.633, 906.635, 906.637), MERCEDES-BENZ SPRINTER 3,5-t Box (906) 315 CDI (906.631, 906.633, 906.635, 906.637), MERCEDES-BENZ SPRINTER 3,5-t Box (906) 309 CDI (906.631, 906.633, 906.635, 906.637), MERCEDES-BENZ SPRINTER 3,5-t Box (906) 318 CDI (906.631, 906.633, 906.635, 906.637), MERCEDES-BENZ SPRINTER 3,5-t Box (906) 310 CDI (906.631, 906.633, 906.635, 906.637), MERCEDES-BENZ SPRINTER 3,5-t Box (906) 313 CDI (906.631, 906.633, 906.635, 906.637), MERCEDES-BENZ SPRINTER 3,5-t Box (906) 316 (906.635, 906.633), MERCEDES-BENZ SPRINTER 3,5-t Box (906) 316 CDI (906.631, 906.633, 906.635, 906.637), MERCEDES-BENZ SPRINTER 3,5-t Box (906) 319 CDI / BlueTEC (906.631, 906.633, 906.635, 906.637), MERCEDES-BENZ SPRINTER 3,5-t Box (906) 311 CDI 4x4 (906.631, 906.633, 906.635, 906.637), MERCEDES-BENZ SPRINTER 3,5-t Box (906) 315 CDI 4x4 (906.631, 906.633, 906.635, 906.637), MERCEDES-BENZ SPRINTER 3,5-t Box (906) 318 CDI 4x4 (906.631, 906.633, 906.635, 906.637), MERCEDES-BENZ SPRINTER 3,5-t Box (906) 316 CDI 4x4 (906.631, 906.633, 906.635, 906.637), MERCEDES-BENZ SPRINTER 3,5-t Box (906) 316 NGT (906.633, 906.635), MERCEDES-BENZ SPRINTER 3,5-t Box (906) 316 LGT (906.633, 906.635), MERCEDES-BENZ SPRINTER 3,5-t Box (906) 314 CDI (906.631, 906.633, 906.635, 906.637), MERCEDES-BENZ SPRINTER 3,5-t Box (906) 311 CDI (906.631, 906.633, 906.635, 906.637), MERCEDES-BENZ SPRINTER 3,5-t Box (906) 314 CDI 4x4 (906.631, 906.633, 906.635, 906.637) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Brake Pads for SPRINTER 3,5-t Box (906) and other MERCEDES-BENZ models
Alternative products
How to change Brake pad set on Mercedes Sprinter W906 316 CDI 2.2 (906.631, 906.633, 906.635) – step-by-step instructions for straightforward car repair Brake pad set
Tools
Replacement: brake pads – MERCEDES-BENZ SPRINTER 3,5-t Box (906). List of the tools you'll need:
Wire brush
Nylon cleaning brush
WD-40 spray
Brake cleaner
Anti-squeal paste
Copper grease
Torque wrench
HEX bit no.H6.
Wheel impact socket #17
Ratchet wrench
Flat Screwdriver
Brake caliper wind back tool
Round-nose pliers
Crow bar
Wheel chock
Replacement: brake pads – MERCEDES-BENZ SPRINTER 3,5-t Box (906). AUTODOC experts recommend:
  • Perform the replacement of brake pads in complete set for each axis. This provides effective braking.
  • The replacement procedure is identical for all brake pads on the same axle.
  • All work should be done with the engine stopped.
Replacement: brake pads – MERCEDES-BENZ SPRINTER 3,5-t Box (906). Use the following procedure:
  1. Step 1
    Open the bonnet. Unscrew the brake fluid reservoir cap.
    Step 2
    How to change Brake Pads on Mercedes Sprinter W906 2006 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 3
    How to replace MERCEDES-BENZ SPRINTER 3,5-t Box (906) 316 CDI 2.2 (906.631, 906.633, 906.635) 2007 Brake Pads - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 4
    Raise the front of the car and secure on supports.
    Step 5
    Mercedes Sprinter W906 313 CDI 2.2 (906.631, 906.633, 906.635) 2008 Brake Pads replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: brake pads – MERCEDES-BENZ SPRINTER 3,5-t Box (906). Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 6
    Changing Brake Pads on MERCEDES-BENZ SPRINTER 3,5-t Box (906) 318 CDI 3.0 (906.631, 906.633, 906.635) 2009 by yourself
    Remove the wheel.
  5. Step 7
    How to remove MERCEDES-BENZ SPRINTER 311 CDI 2.2 (906.631, 906.633, 906.635) 2010 Brake Pads - online easy-to-follow instructions
    Remove the dust boot caps of the brake caliper guide pins.
  6. Step 8
    How to replace Brake Pads on MERCEDES-BENZ SPRINTER 3,5-t Box (906) 2011: download PDF manuals and video instructions
    Disconnect the brake pad wear sensor plug. Use round-nose pliers.
    Please note!
    Some cars are not equipped with the brake pad wear sensor.
  7. Step 9
    How hard is it to do yourself: Brake Pads replacement on Mercedes Sprinter W906 310 CDI 2.2 (906.631, 906.633, 906.635) 2012 - download illustrated guide
    Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.
  8. Step 10
    Need to know how to renew Brake Pads on MERCEDES-BENZ SPRINTER 2013? This free workshop manual will help you to do it yourself
    Unscrew the brake caliper fastening. Use HEX No.H6. Use a ratchet wrench.
  9. Step 11
    Remove the guide pins from the brake caliper.
    Step 12
    Spread the brake pads. Use a crowbar.
    Step 13
    Changing of Brake Pads on Mercedes Sprinter W906 2014 won't be an issue if you follow this illustrated step-by-step guide
    Remove the brake caliper.
    AUTODOC recommends:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
  10. Step 14
    MERCEDES-BENZ SPRINTER 316 NGT 1.8 (906.633, 906.635) Brake Pads replacement: online guides and video tutorials
    Remove the brake pads.
    Replacement: brake pads – MERCEDES-BENZ SPRINTER 3,5-t Box (906). AUTODOC experts recommend:
    Measure the brake disc thickness. Upon reaching the wear limit the part must be replaced.
  11. Step 15
    Replacing Brake Pads on Mercedes Sprinter W906 2016 316 CDI 2.2 (906.631, 906.633, 906.635) by yourself
    Clean the brake caliper bracket from dirt and dust. Use a wire brush. Use a brake cleaner.
    AUTODOC recommends:
    Replacement: brake pads – MERCEDES-BENZ SPRINTER 3,5-t Box (906). After applying the spray, wait a few minutes.
  12. Step 16
    SPRINTER 3,5-t Box (906) 311 CDI 2.2 (906.631, 906.633, 906.635) 2017 Brake Pads DIY replacement workshop manual
    Remove the retaining springs of the brake pads. Use a flat screwdriver.
  13. Step 17
    How to change Brake Pads on MERCEDES-BENZ SPRINTER 3,5-t Box (906) 2018 - tips and tricks
    Install the retaining springs of the brake pads.
  14. Step 18
    Remove the brake pad wear sensor from the brake pad. Use a flat screwdriver.
    Step 19
    Step-by-step recommendations for DIY replacement Mercedes Sprinter W906 2019 311 CDI 2.2 (906.631, 906.633, 906.635) Brake Pads
    Treat the brake pads in the area where their surface comes into contact with the brake caliper bracket. Use anti-squeal paste.
    Replacement: brake pads – MERCEDES-BENZ SPRINTER 3,5-t Box (906). Tip from AUTODOC:
    Make sure the disc surface is clean before installing the pads.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ Sprinter 3.5-T Van (W906) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
MERCEDES-BENZ SPRINTER 3,5-t Box (906) Brake Pads replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
Autodoc CLUB App icon
DIY MERCEDES-BENZ SPRINTER 3,5-t Box (906) Brake Pads replacement - online guide
Tips & tricks for your MERCEDES-BENZ SPRINTER 3,5-t Box (906)
View more
  • How to change Brake pad set on MERCEDES-BENZ SPRINTER 3,5-t Box (906) 315 CDI 2.2 (906.631, 906.633, 906.635) - replacement tricks
    Stop Rust Before It Starts: Top 5 Tips for Car Body Protection | AUTODOC Insights
  • Changing Disc pads Mercedes Sprinter W906 316 CDI 2.2 (906.631, 906.633, 906.635) - Replacement Tips
    What to do if your car’s bonnet won’t open | AUTODOC tips
  • Maintenance Hacks - MERCEDES-BENZ SPRINTER 3,5-t Box (906) 313 CDI 2.2 (906.631, 906.633, 906.635) Brake pad kit replacement guide
    5 mistakes made when washing the engine | AUTODOC tips
  • Replace Disc brake pads on Mercedes Sprinter W906 - free video tips
    Understanding Car Tools: The Key Differences You Need to Know | AUTODOC tips