Important!
This replacement procedure can be used for:
MERCEDES-BENZ E-Class Saloon (W211) E 240 4-matic (211.080), MERCEDES-BENZ E-Class Saloon (W211) E 320 4-matic (211.082), MERCEDES-BENZ E-Class Saloon (W211) E 500 4-matic (211.083), MERCEDES-BENZ E-Class Saloon (W211) E 280 CDI 4-matic (211.084), MERCEDES-BENZ E-Class Saloon (W211) E 280 4-matic (211.092), MERCEDES-BENZ E-Class Saloon (W211) E 350 4-matic (211.087), MERCEDES-BENZ E-Class Saloon (W211) E 500 4-matic (211.090), MERCEDES-BENZ E-Class Saloon (W211) E 230 (211.052) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Suspension Ball Joint for E-Class Saloon (W211) and other MERCEDES-BENZ models
Alternative products
How to change Ball Joint on W211 E 220 CDI 2.2 (211.006) – step-by-step instructions for straightforward car repair Ball Joint
Tools
Replacement: ball joint – MERCEDES-BENZ E-CLASS (W211). Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Ceramic grease
Torque wrench
Combination spanner #22
Drive socket # 21
Drive socket # 22
Wheel impact socket #17
Ratchet wrench
Tap wrench
Ball joint puller
Hydraulic transmission jack
Wheel chock
Replacement: ball joint – MERCEDES-BENZ E-CLASS (W211). Tip from AUTODOC:
  • The replacement procedure is identical for the left and right ball joints.
  • All work should be done with the engine stopped.
Replacement: ball joint – MERCEDES-BENZ E-CLASS (W211). Recommended sequence of steps:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Suspension Ball Joint on W211 2002 - free PDF and video manuals
    Loosen the wheel bolts. Use wheel impact socket #17. Use a tap wrench.
  2. Step 3
    Raise the car.
    AUTODOC recommends:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
    Step 4
    How to replace MERCEDES-BENZ E-Class Saloon (W211) E 220 CDI 2.2 (211.006) 2003 Suspension Ball Joint - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    Replacement: ball joint – MERCEDES-BENZ E-CLASS (W211). Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  3. Step 5
    W211 E 270 CDI 2.7 (211.016) 2004 Suspension Ball Joint replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Suspension Ball Joint on MERCEDES-BENZ E-Class Saloon (W211) E 220 CDI 2.2 (211.008) 2005 by yourself
    Clean the ball joint fasteners. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove MERCEDES-BENZ E-CLASS E 280 CDI 3.0 (211.020) 2006 Suspension Ball Joint - online easy-to-follow instructions
    Unscrew the fastener connecting the ball joint to the steering knuckle. Use a combination spanner #22.
  6. Step 8
    How to replace Suspension Ball Joint on MERCEDES-BENZ E-Class Saloon (W211) 2007: download PDF manuals and video instructions
    Unscrew the fastener connecting the ball joint to the suspension control arm. Use a drive socket #22. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Suspension Ball Joint replacement on W211 E 320 CDI 3.0 (211.022) 2008 - download illustrated guide
    Disconnect the ball joint from the control arm. Use a ball joint puller.
  8. Step 10
    Need to know how to renew Suspension Ball Joint on MERCEDES-BENZ E-CLASS 2009? This free workshop manual will help you to do it yourself
    Disconnect the ball joint from the steering knuckle. Use a ball joint puller.
  9. Step 11
    Changing of Suspension Ball Joint on W211 2002 won't be an issue if you follow this illustrated step-by-step guide
    Remove the ball joint.
  10. Step 12
    Support the steering knuckle. Use a hydraulic transmission jack.
    Step 13
    Clean the ball joint mounting seat. Use a wire brush.
    Step 14
    MERCEDES-BENZ E-CLASS E 200 CDI 2.2 (211.007) Suspension Ball Joint replacement: online guides and video tutorials
    Install a new ball joint.
  11. Step 15
    Replacing Suspension Ball Joint on W211 2004 E 220 CDI 2.2 (211.006) by yourself
    Attach the ball joint to the control arm.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ E-Class Saloon (W211) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY MERCEDES-BENZ E-Class Saloon (W211) Suspension Ball Joint replacement - online guide
Tips & tricks for your MERCEDES-BENZ E-Class Saloon (W211)
View more
  • How to change Suspension ball joint on MERCEDES-BENZ E-Class Saloon (W211) E 320 CDI 3.2 (211.026) - replacement tricks
    DIY jack restoration | AUTODOC tips
  • Changing Suspension ball joint W211 E 220 CDI 2.2 (211.006) - Replacement Tips
    Checking the starter without removing it | AUTODOC tips
  • Maintenance Hacks - MERCEDES-BENZ E-Class Saloon (W211) E 270 CDI 2.7 (211.016) Suspension ball joint replacement guide
    #DIY guide: Changing your car's color with a spray can | AUTODOC tips
  • Replace Suspension ball joint on W211 - free video tips
    How to make an injector test bench yourself
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
MERCEDES-BENZ E-Class Saloon (W211) Suspension Ball Joint replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME