Disclaimer
How to change front anti roll bar links on VW PASSAT Saloon (32B) – replacement guide
downloads:
0
Views:
6
Important!
This replacement procedure can be used for:
VW PASSAT Saloon (32B) 1.6, VW PASSAT Saloon (32B) 1.6 … View more
The steps may slightly vary depending on the car design.
VW PASSAT Saloon (32B) 1.6, VW PASSAT Saloon (32B) 1.6 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for PASSAT Saloon (32B) and other VW models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #16
Wheel impact socket #17
Torque wrench
Hydraulic transmission jack
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on VW PASSAT Saloon (32B) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- Please note: all work on the car – VW PASSAT Saloon (32B) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1
Secure the wheels with chocks. - Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VW PASSAT Saloon (32B) - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. - Step 8
Unscrew the fastener connecting the stabilizer bar with the control arm. Use a combination spanner #16. - Step 9
Remove the fastening bolts. - Step 10
Remove the stabilizer rod.Replacement: anti roll bar links – VW PASSAT Saloon (32B). Professionals recommend:Examine stabiliser bushes. Replace them if needed. - Step 11
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 12
Ιnstall the transverse stabilizer link. - Step 13
Install the fastening bolts. - Step 14
Tighten the stabiliser link fastener. Use a combination spanner #16.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Passat B2 Saloon (32B) model
Popular maintenance tutorials for VW PASSAT Saloon (32B)
Complete guides for changing the Drop links on different VW PASSAT models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW PASSAT Saloon (32B)
View more
Checking the starter without removing it | AUTODOC tips
How to replace a timing chain yourself
CHECK ENGINE light turned on – step-by-step guide on what to do
What to do if your check engine light is on | AUTODOC tips
Most commonly replaced car parts on VW PASSAT
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

































