Important!
This replacement procedure can be used for:
VW Jetta Mk5 (1K) 1.6 TDI, VW Jetta Mk5 (1K) 1.6, VW Jetta Mk5 (1K) 1.6 FSI, VW Jetta Mk5 (1K) 2.0 FSI, VW Jetta Mk5 (1K) 1.9 TDI, VW Jetta Mk5 (1K) 2.0 TDI 16V, VW Jetta Mk5 (1K) 2.0 TFSI, VW Jetta Mk5 (1K) 2.0 TDI, VW Jetta Mk5 (1K) 1.4 TSI, VW Jetta Mk5 (1K) 1.4 TSI, VW Jetta Mk5 (1K) 2.0 TDI, VW Jetta Mk5 (1K) 2.0 TDI, VW Jetta Mk5 (1K) 1.4 TSI, VW Jetta Mk5 (1K) 2.5, VW Jetta Mk5 (1K) 2.5, VW Jetta Mk5 (1K) 1.4 TSI, VW Jetta Mk5 (1K) 1.6 TDI, VW Jetta Mk5 (1K) 1.6 MultiFuel View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for Jetta Mk5 (1K) and other VW models
Tools
Replacement: anti roll bar links – VW JETTA III (1K2). List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Ceramic grease
Copper grease
Torque wrench
Combination spanner #18
Combination spanner #19
Drive socket # 18
Drive socket # 19
XZN socket bit #6
HEX bit No.H5
Wheel impact socket #17
Ratchet wrench
Wheel chock
AUTODOC recommends:
  • Replace the stabiliser links on VW JETTA III (1K2) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • Please note: all work on the car – VW JETTA III (1K2) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Anti Roll Bar Links on VW Jetta 1k2 2005 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the car.
    Replacement: anti roll bar links – VW JETTA III (1K2). Professionals recommend:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
    Step 4
    How to replace VW Jetta Mk5 (1K) 1.9 TDI 2006 Anti Roll Bar Links - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VW JETTA III (1K2)
  3. Step 5
    VW Jetta 1k2 1.6 2007 Anti Roll Bar Links replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Anti Roll Bar Links on VW Jetta Mk5 (1K) 1.6 FSI 2008 by yourself
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove VW JETTA 2.0 TDI 2009 Anti Roll Bar Links - online easy-to-follow instructions
    Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #18. Use XZN #6. Use a ratchet wrench.
  6. Step 8
    How to replace Anti Roll Bar Links on VW Jetta Mk5 (1K) 2010: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #18. Use XZN #6. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Anti Roll Bar Links replacement on VW Jetta 1k2 1.6 TDI 2005 - download illustrated guide
    Remove the stabiliser link.
    Replacement: anti roll bar links – VW JETTA III (1K2). Tip from AUTODOC experts:
    Examine stabiliser bushes. Replace them if needed.
  8. Step 10
    Need to know how to renew Anti Roll Bar Links on VW JETTA 2006? This free workshop manual will help you to do it yourself
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
  9. Step 11
    Changing of Anti Roll Bar Links on VW Jetta 1k2 2007 won't be an issue if you follow this illustrated step-by-step guide
    Install a new stabiliser link and tighten the fasteners. Use a combination spanner #19. Use HEX No.H5. Use a ratchet wrench.
  10. Step 12
    VW JETTA 2.0 TFSI Anti Roll Bar Links replacement: online guides and video tutorials
    Tighten the fastener connecting the stabilizer link to the shock strut. Use a drive socket #19. Use a torque wrench. Tighten it to 65 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the VW Jetta Mk5 (1K) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VW Jetta Mk5 (1K) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VW Jetta Mk5 (1K) Anti Roll Bar Links replacement - online guide
Tips & tricks for your VW Jetta Mk5 (1K)
View more
  • How to change Drop links on VW Jetta Mk5 (1K) 2.0 TDI 16V - replacement tricks
    How to shine your tyres | AUTODOC tips
  • Changing Stabilizer link VW Jetta 1k2 1.9 TDI - Replacement Tips
    What to check when buying a used car | AUTODOC tips
  • Maintenance Hacks - VW Jetta Mk5 (1K) 1.6 Sway bar link replacement guide
    TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
  • Replace Drop link on VW Jetta 1k2 - free video tips
    What causes engine misfire? | AUTODOC