Disclaimer
How to change front anti roll bar links on VW Caddy V Van (SBA, SBH) – replacement guide
downloads:
0
Views:
15
Important!
This replacement procedure can be used for:
VW Caddy V Van (SBA, SBH) 1.5 TSi EVO, VW Caddy V Van (SBA, SBH) 2.0 TDi BMT, VW Caddy V Van (SBA, SBH) 2.0 TDi BMT, VW Caddy V Van (SBA, SBH) 2.0 TDi BMT … View more
The steps may slightly vary depending on the car design.
VW Caddy V Van (SBA, SBH) 1.5 TSi EVO, VW Caddy V Van (SBA, SBH) 2.0 TDi BMT, VW Caddy V Van (SBA, SBH) 2.0 TDi BMT, VW Caddy V Van (SBA, SBH) 2.0 TDi BMT … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for Caddy V Van (SBA, SBH) and other VW models
Alternative products
Anti-roll bar link
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #18
Drive socket # 18
HEX bit no.H5.
Wheel impact socket #17
Ratchet wrench
Torque wrench
Wheel chock
Replacement: anti roll bar links – VW Caddy V Kastenwagen (SBA, SBH). AUTODOC recommends:
- Replace the stabiliser links on VW Caddy V Kastenwagen (SBA, SBH) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- Please note: all work on the car – VW Caddy V Kastenwagen (SBA, SBH) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: anti roll bar links – VW Caddy V Kastenwagen (SBA, SBH). AUTODOC experts recommend:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #18. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #18. Use HEX No.H5. Use a ratchet wrench. - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – VW Caddy V Kastenwagen (SBA, SBH). Tip from AUTODOC:Examine stabiliser bushes. Replace them if needed. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 11
Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Caddy V Van (SBA, SBH) model
Popular maintenance tutorials for VW Caddy V Kastenwagen (SBA, SBH)
Free download PDF
1.37 MB
Free download PDF1.64 MB
Free download PDF2.19 MB
Free download PDF675.84 KB
Free download PDF1.04 MB
Free download PDF1.2 MB
Complete guides for changing the Drop links on different VW CADDY models
Free download PDF1.51 MB
Free download PDF1.2 MB
Free download PDF2.08 MB
Free download PDF2.06 MB
Free download PDF1.52 MB
Free download PDF2.06 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW Caddy V Van (SBA, SBH)
View more
Why does it burn oil? The main cause of oil consumption in EA888 Gen 1
Revitalize Your Car Interior: DIY Steering Wheel Cover with AUTODOC Tips
How to inspect and troubleshoot your car heater when it’s not working
Deep interior cleaning | Car transformation by detailing
Most commonly replaced car parts on VW CADDY
Time to replace parts? Get even better deals in our Shop app.
SCAN ME