Disclaimer
How to change front anti roll bar links on VW Caddy V California (SBB, SBJ) – replacement guide
downloads:
0
Views:
2
Important!
This replacement procedure can be used for:
VW Caddy V California (SBB, SBJ) 2.0 TDi BMT, VW Caddy V California (SBB, SBJ) 2.0 TDi BMT, VW Caddy V California (SBB, SBJ) 2.0 TDi BMT, VW Caddy V California (SBB, SBJ) 2.0 TDI BMT 4motion, VW Caddy V California (SBB, SBJ) 1.6 SRE, VW Caddy V California (SBB, SBJ) 1.5 TSi EVO … View more
The steps may slightly vary depending on the car design.
VW Caddy V California (SBB, SBJ) 2.0 TDi BMT, VW Caddy V California (SBB, SBJ) 2.0 TDi BMT, VW Caddy V California (SBB, SBJ) 2.0 TDi BMT, VW Caddy V California (SBB, SBJ) 2.0 TDI BMT 4motion, VW Caddy V California (SBB, SBJ) 1.6 SRE, VW Caddy V California (SBB, SBJ) 1.5 TSi EVO … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for Caddy V California (SBB, SBJ) and other VW models
Anti-roll bar link
Alternative products
Anti-roll bar link
Wire brush
WD-40 spray
Copper grease
Combination spanner #18
XZN socket bit # 6
Wheel impact socket #17
Ratchet wrench
Torque wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on VW Caddy V California (SBB, SBJ) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – VW Caddy V California (SBB, SBJ). Recommended sequence of steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. VW Caddy V California (SBB, SBJ) - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #18. Use XZN #6. Use a ratchet wrench. - Step 8
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 9
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #18. Use XZN #6. Use a ratchet wrench. - Step 10
Remove the stabilizer rod.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Caddy V California (SBB, SBJ) model
Popular maintenance tutorials for VW Caddy V California (SBB, SBJ)
Free download PDF
1.62 MB
Free download PDF1.64 MB
Free download PDF2.13 MB
Free download PDF1.01 MB
Free download PDF1.2 MB
Free download PDF1.75 MB
Complete guides for changing the Drop links on different VW CADDY models
Free download PDF1.51 MB
Free download PDF1.2 MB
Free download PDF2.08 MB
Free download PDF2.06 MB
Free download PDF1.52 MB
Free download PDF2.06 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW Caddy V California (SBB, SBJ)
View more
5 mistakes when replacing consumables
BMW E30 Turbo Suspension Swap: Boost Your Handling | AUTODOC project
Top 4 Car Cleaning Products to Protect Your Car's Body | AUTODOC Tips
Understanding Car Tools: The Key Differences You Need to Know | AUTODOC tips
Most commonly replaced car parts on VW CADDY
Time to replace parts? Get even better deals in our Shop app.
SCAN ME