Important!
This replacement procedure can be used for:
VW CADDY ALLTRACK Variant (SAB) 1.0 TSI, VW CADDY ALLTRACK Variant (SAB) 1.2 TSI, VW CADDY ALLTRACK Variant (SAB) 1.4 TGI CNG, VW CADDY ALLTRACK Variant (SAB) 1.4 TSI, VW CADDY ALLTRACK Variant (SAB) 2.0 TDI, VW CADDY ALLTRACK Variant (SAB) 2.0 TDI, VW CADDY ALLTRACK Variant (SAB) 2.0 TDI 4motion, VW CADDY ALLTRACK Variant (SAB) 2.0 TDI, VW CADDY ALLTRACK Variant (SAB) 2.0 TDI 4motion, VW CADDY ALLTRACK Variant (SAB) 1.4 TSI, VW CADDY ALLTRACK Variant (SAB) 1.0 TSI, VW CADDY ALLTRACK Variant (SAB) 2.0 TDI 4motion, VW CADDY ALLTRACK Variant (SAB) 2.0 TDI 4motion, VW CADDY ALLTRACK Variant (SAB) 2.0 TDI, VW CADDY ALLTRACK Variant (SAB) 1.6 TDI, VW CADDY ALLTRACK Variant (SAB) 1.6 TDI, VW CADDY ALLTRACK Variant (SAB) 2.0 TDI View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for CADDY ALLTRACK Variant (SAB) and other VW models
Alternative products
How to change Anti-roll bar link on VW Caddy Alltrack Kombi 2.0 TDI – step-by-step instructions for straightforward car repair Anti-roll bar link
Tools
Replacement: anti roll bar links – VW CADDY ALLTRACK Variant (SAB). Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #18
Drive socket # 18
XZN socket bit # 6
Wheel impact socket #17
Ratchet wrench
Wheel chock
AUTODOC recommends:
  • Replace the stabiliser links on VW CADDY ALLTRACK Variant (SAB) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • Please note: all work on the car – VW CADDY ALLTRACK Variant (SAB) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Anti Roll Bar Links on VW Caddy Alltrack Kombi 2015 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    How to replace VW CADDY ALLTRACK Variant (SAB) 2.0 TDI 2016 Anti Roll Bar Links - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VW CADDY ALLTRACK Variant (SAB)
  3. Step 5
    VW Caddy Alltrack Kombi 1.4 TGI CNG 2017 Anti Roll Bar Links replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Anti Roll Bar Links on VW CADDY ALLTRACK Variant (SAB) 1.4 TSI 2018 by yourself
    Clean all joints of the stabiliser link. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove VW CADDY 1.2 TSI 2019 Anti Roll Bar Links - online easy-to-follow instructions
    Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #18. Use a ratchet wrench.
  6. Step 8
    How to replace Anti Roll Bar Links on VW CADDY ALLTRACK Variant (SAB) 2020: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #18. Use XZN #6. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Anti Roll Bar Links replacement on VW Caddy Alltrack Kombi 2.0 TDI 2021 - download illustrated guide
    Remove the stabilizer rod.
  8. Step 10
    Need to know how to renew Anti Roll Bar Links on VW CADDY 2022? This free workshop manual will help you to do it yourself
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
  9. Step 11
    Changing of Anti Roll Bar Links on VW Caddy Alltrack Kombi 2023 won't be an issue if you follow this illustrated step-by-step guide
    Ιnstall the transverse stabilizer link.
  10. Step 12
    VW CADDY 2.0 TDI 4motion Anti Roll Bar Links replacement: online guides and video tutorials
    Tighten the stabiliser link fastener. Use a combination spanner #18. Use XZN #6. Use a ratchet wrench.
  11. Step 13
    Replacing Anti Roll Bar Links on VW Caddy Alltrack Kombi 2025 2.0 TDI by yourself
    Tighten the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #18. Use a drive socket #18. Use XZN #6. Use a torque wrench. Tighten it to 55 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the VW Caddy Alltrack IV Kombi (SAB) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY VW CADDY ALLTRACK Variant (SAB) Anti Roll Bar Links replacement - online guide
Tips & tricks for your VW CADDY ALLTRACK Variant (SAB)
View more
  • How to change Drop links on VW CADDY ALLTRACK Variant (SAB) 2.0 TDI 4motion - replacement tricks
    What to do if your check engine light is on | AUTODOC tips
  • Changing Stabilizer link VW Caddy Alltrack Kombi 2.0 TDI - Replacement Tips
    Which Coolant is Best? Comparison Test | AUTODOC
  • Maintenance Hacks - VW CADDY ALLTRACK Variant (SAB) 1.4 TGI CNG Sway bar link replacement guide
    Deep interior cleaning | Car transformation by detailing
  • Replace Drop link on VW Caddy Alltrack Kombi - free video tips
    Why Is the Windscreen Washer Not Spraying? Solution
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
VW CADDY ALLTRACK Variant (SAB) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME