Disclaimer
How to change front anti roll bar links on VAUXHALL Insignia Mk I (A) Hatchback (G09) – replacement guide
downloads:
12
Views:
231
Important!
This replacement procedure can be used for:
VAUXHALL Insignia Mk I (A) Hatchback (G09) 2.0 CDTI (68) … View more
The steps may slightly vary depending on the car design.
VAUXHALL Insignia Mk I (A) Hatchback (G09) 2.0 CDTI (68) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for Insignia Mk I (A) Hatchback (G09) and other VAUXHALL models
Alternative products
Anti-roll bar link
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #18
Combination spanner #19
Drive socket # 18
Drive socket # 19
Wheel impact socket #19
Ratchet wrench
Torque wrench
Wheel chock
Replacement: anti roll bar links – VAUXHALL INSIGNIA Mk I (A). AUTODOC recommends:
- Replace the stabiliser links on VAUXHALL INSIGNIA Mk I (A) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – VAUXHALL INSIGNIA Mk I (A). Use the following procedure:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VAUXHALL INSIGNIA Mk I (A) - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #19. Use a drive socket #19. Use a ratchet wrench. - Step 8
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 9
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #19 (2 pieces). - Step 10
Remove the stabilizer rod.Replacement: anti roll bar links – VAUXHALL INSIGNIA Mk I (A). AUTODOC experts recommend:Examine stabiliser bushes. Replace them if needed. - Step 11
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 12
Ιnstall the transverse stabilizer link. - Step 13
Tighten the stabiliser link fastener. Use a combination spanner #18.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VAUXHALL Insignia Mk1 (A) Hatchback (G09) model
Popular maintenance tutorials for Vauxhall Insignia Mk1
Free download PDF
1.68 MB
Free download PDF645.12 KB
Free download PDF1.62 MB
Free download PDF1.32 MB
Free download PDF1.32 MB
Free download PDF870.4 KB
Complete guides for changing the Drop links on different VAUXHALL INSIGNIA models
Free download PDF1.39 MB
Free download PDF1.39 MB
Free download PDF972.8 KB
Free download PDF1.17 MB
Free download PDF1.17 MB
Free download PDF1.16 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VAUXHALL Insignia Mk I (A) Hatchback (G09)
View more
CHECK ENGINE light turned on – step-by-step guide on what to do
#DIY guide: Changing your car's color with a spray can | AUTODOC tips
DIY restoration of an old impact wrench
Why Is the Windscreen Washer Not Spraying? Solution
Most commonly replaced car parts on VAUXHALL INSIGNIA
Time to replace parts? Get even better deals in our Shop app.
SCAN ME