Disclaimer
How to change front anti roll bar links on VAUXHALL INSIGNIA Mk I (A) Estate – replacement guide
downloads:
4
Views:
41
Important!
This replacement procedure can be used for:
VAUXHALL INSIGNIA Mk I (A) Estate 2.0 CDTI (35), VAUXHALL INSIGNIA Mk I (A) Estate 2.0 CDTI 4x4 (35), VAUXHALL INSIGNIA Mk I (A) Estate 2.0 CDTI (35), VAUXHALL INSIGNIA Mk I (A) Estate 1.4 (35), VAUXHALL INSIGNIA Mk I (A) Estate 2.0 Biturbo CDTI (35), VAUXHALL INSIGNIA Mk I (A) Estate 2.0 Biturbo CDTI 4x4 (35), VAUXHALL INSIGNIA Mk I (A) Estate 1.8 (35), VAUXHALL INSIGNIA Mk I (A) Estate 2.0 Turbo (35), VAUXHALL INSIGNIA Mk I (A) Estate 2.8 V6 Turbo (35), VAUXHALL INSIGNIA Mk I (A) Estate 2.0 CDTI (35), VAUXHALL INSIGNIA Mk I (A) Estate 2.0 CDTI (35), VAUXHALL INSIGNIA Mk I (A) Estate 2.0 Turbo 4x4 (35), VAUXHALL INSIGNIA Mk I (A) Estate 1.6 Turbo (35), VAUXHALL INSIGNIA Mk I (A) Estate 2.8 VXR (35), VAUXHALL INSIGNIA Mk I (A) Estate 2.0 CDTI 4x4 (35), VAUXHALL INSIGNIA Mk I (A) Estate 1.4 LPG (35), VAUXHALL INSIGNIA Mk I (A) Estate 1.6 Turbo (35), VAUXHALL INSIGNIA Mk I (A) Estate 2.0 CDTI (35), VAUXHALL INSIGNIA Mk I (A) Estate 2.0 Turbo (35), VAUXHALL INSIGNIA Mk I (A) Estate 2.0 CDTI (35), VAUXHALL INSIGNIA Mk I (A) Estate 2.0 CDTI 4x4 (35), VAUXHALL INSIGNIA Mk I (A) Estate 1.6 CDTI (35), VAUXHALL INSIGNIA Mk I (A) Estate 1.6 … View more
The steps may slightly vary depending on the car design.
VAUXHALL INSIGNIA Mk I (A) Estate 2.0 CDTI (35), VAUXHALL INSIGNIA Mk I (A) Estate 2.0 CDTI 4x4 (35), VAUXHALL INSIGNIA Mk I (A) Estate 2.0 CDTI (35), VAUXHALL INSIGNIA Mk I (A) Estate 1.4 (35), VAUXHALL INSIGNIA Mk I (A) Estate 2.0 Biturbo CDTI (35), VAUXHALL INSIGNIA Mk I (A) Estate 2.0 Biturbo CDTI 4x4 (35), VAUXHALL INSIGNIA Mk I (A) Estate 1.8 (35), VAUXHALL INSIGNIA Mk I (A) Estate 2.0 Turbo (35), VAUXHALL INSIGNIA Mk I (A) Estate 2.8 V6 Turbo (35), VAUXHALL INSIGNIA Mk I (A) Estate 2.0 CDTI (35), VAUXHALL INSIGNIA Mk I (A) Estate 2.0 CDTI (35), VAUXHALL INSIGNIA Mk I (A) Estate 2.0 Turbo 4x4 (35), VAUXHALL INSIGNIA Mk I (A) Estate 1.6 Turbo (35), VAUXHALL INSIGNIA Mk I (A) Estate 2.8 VXR (35), VAUXHALL INSIGNIA Mk I (A) Estate 2.0 CDTI 4x4 (35), VAUXHALL INSIGNIA Mk I (A) Estate 1.4 LPG (35), VAUXHALL INSIGNIA Mk I (A) Estate 1.6 Turbo (35), VAUXHALL INSIGNIA Mk I (A) Estate 2.0 CDTI (35), VAUXHALL INSIGNIA Mk I (A) Estate 2.0 Turbo (35), VAUXHALL INSIGNIA Mk I (A) Estate 2.0 CDTI (35), VAUXHALL INSIGNIA Mk I (A) Estate 2.0 CDTI 4x4 (35), VAUXHALL INSIGNIA Mk I (A) Estate 1.6 CDTI (35), VAUXHALL INSIGNIA Mk I (A) Estate 1.6 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for INSIGNIA Mk I (A) Estate and other VAUXHALL models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #18
Combination spanner #19
Drive socket # 18
Drive socket # 19
Wheel impact socket #19
Ratchet wrench
Torque wrench
Wheel chock
Replacement: anti roll bar links – VAUXHALL INSIGNIA Mk I (A) Estate. AUTODOC recommends:
- Replace the stabiliser links on VAUXHALL INSIGNIA Mk I (A) Estate in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – VAUXHALL INSIGNIA Mk I (A) Estate. Use the following procedure:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VAUXHALL INSIGNIA Mk I (A) Estate - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #19. Use a drive socket #19. Use a ratchet wrench. - Step 8
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 9
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #19 (2 pieces). - Step 10
Remove the stabilizer rod.Replacement: anti roll bar links – VAUXHALL INSIGNIA Mk I (A) Estate. AUTODOC experts recommend:Examine stabiliser bushes. Replace them if needed. - Step 11
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 12
Ιnstall the transverse stabilizer link. - Step 13
Tighten the stabiliser link fastener. Use a combination spanner #18.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VAUXHALL Insignia Mk1 (A) Sports Tourer (G09) model
Popular maintenance tutorials for Insignia A Sports Tourer
Complete guides for changing the Drop links on different VAUXHALL INSIGNIA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VAUXHALL INSIGNIA Mk I (A) Estate
View more
2 ways to clean the EGR valve – which one is better?
CHECK ENGINE light turned on – step-by-step guide on what to do
#DIY Tips for Fixing Your Car's Air Conditioning Issues | Don't Wait for Costly Repairs!
How to Get the Best Deals on Car Parts | Save Money with AUTODOC
Most commonly replaced car parts on VAUXHALL INSIGNIA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME



























