Disclaimer
How to change front anti roll bar links on VAUXHALL Corsa Mk III (D) Hatchback (S07) – replacement guide
downloads:
2
Views:
14
Important!
This replacement procedure can be used for:
VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.6 VXR (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.0 (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.2 (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.4 (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.6 VXR (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.3 CDTI (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.3 CDTI (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.7 CDTI (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.6 SRi (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.3 CDTI (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.4 (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.7 CDTI (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.0 i 12V (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.2 i 16V (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.2 (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.4 (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.6 VXR (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.6 VXR (L08) … View more
The steps may slightly vary depending on the car design.
VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.6 VXR (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.0 (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.2 (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.4 (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.6 VXR (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.3 CDTI (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.3 CDTI (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.7 CDTI (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.6 SRi (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.3 CDTI (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.4 (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.7 CDTI (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.0 i 12V (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.2 i 16V (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.2 (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.4 (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.6 VXR (L08), VAUXHALL Corsa Mk III (D) Hatchback (S07) 1.6 VXR (L08) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for Corsa Mk III (D) Hatchback (S07) and other VAUXHALL models
Anti-roll bar link
Anti-roll bar link
Anti-roll bar link for Corsa Mk3 (D) Hatchback (S07) Diesel (90 hp)
Anti-roll bar link for Corsa Mk3 (D) Hatchback (S07) Diesel (125 hp)
Anti-roll bar link for Corsa Mk3 (D) Hatchback (S07) Petrol (150 hp)
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #15
Combination spanner #17
Torx bit T30
Drive socket # 17
Wheel impact socket #17
Ratchet wrench
Torque wrench
Wheel chock
Replacement: anti roll bar links – VAUXHALL CORSA Mk III (D) (L_8). AUTODOC recommends:
- Replace the stabiliser links on VAUXHALL CORSA Mk III (D) (L_8) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- Please note: all work on the car – VAUXHALL CORSA Mk III (D) (L_8) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: anti roll bar links – VAUXHALL CORSA Mk III (D) (L_8). Tip from AUTODOC experts:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #15. Use Torx T30. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #15. Use Torx T30. Use a ratchet wrench. - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – VAUXHALL CORSA Mk III (D) (L_8). Tip:Examine stabiliser bushes. Replace them if needed. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 11
Ιnstall the transverse stabilizer link.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the VAUXHALL Corsa Mk3 (D) Hatchback (S07) model.
Popular maintenance tutorials for Vauxhall Corsa D
Free download PDF
2.15 MB
Free download PDF1.57 MB
Free download PDF4.1 MB
Free download PDF1.49 MB
Free download PDF1.43 MB
Complete guides for changing the Drop links on different VAUXHALL CORSA models
Free download PDF1.28 MB
Free download PDF972.8 KB
Free download PDF1.17 MB
Free download PDF1.17 MB
Free download PDF1.17 MB
Free download PDF1.17 MB
Your profile is your personal assistant.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- - scan the QR code
- - download from App Store
- - download from Google Play
Tips & tricks for your VAUXHALL Corsa Mk III (D) Hatchback (S07)
View more
How do EGR valves work? | AUTODOC
Top 5 mistakes when buying car parts
How to start a car after a long idle period | AUTODOC tips
5 car tips for a winter's day | AUTODOC tips
