
Disclaimer
How to change front anti roll bar links on SKODA Superb II Estate (3T5) – replacement guide
downloads:
2
Views:
18
Important!
This replacement procedure can be used for:
SKODA SUPERB Estate (3T5) 1.4 TSI, SKODA SUPERB Estate (3T5) 1.8 TSI, SKODA SUPERB Estate (3T5) 1.8 TSI 4x4, SKODA SUPERB Estate (3T5) 3.6 V6 4x4, SKODA SUPERB Estate (3T5) 2.0 TDI 16V, SKODA SUPERB Estate (3T5) 2.0 TDI, SKODA SUPERB Estate (3T5) 2.0 TDI 4x4, SKODA SUPERB Estate (3T5) 2.0 TDI … View more
The steps may slightly vary depending on the car design.
SKODA SUPERB Estate (3T5) 1.4 TSI, SKODA SUPERB Estate (3T5) 1.8 TSI, SKODA SUPERB Estate (3T5) 1.8 TSI 4x4, SKODA SUPERB Estate (3T5) 3.6 V6 4x4, SKODA SUPERB Estate (3T5) 2.0 TDI 16V, SKODA SUPERB Estate (3T5) 2.0 TDI, SKODA SUPERB Estate (3T5) 2.0 TDI 4x4, SKODA SUPERB Estate (3T5) 2.0 TDI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for SUPERB Estate (3T5) and other SKODA models
Anti-roll bar link
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #18
HEX bit no.H5.
XZN socket bit # 6
Drive socket # 18
Wheel impact socket #17
Ratchet wrench
Torque wrench
Wheel chock
Replacement: anti roll bar links – SKODA SUPERB Estate (3T5). AUTODOC recommends:
- Replace the stabiliser links on SKODA SUPERB Estate (3T5) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – SKODA SUPERB Estate (3T5). Take the following steps:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the front of the car and secure on supports.Step 4Unscrew the wheel bolts.Replacement: anti roll bar links – SKODA SUPERB Estate (3T5). Tip:To avoid injury, hold up the wheel when unscrewing the bolts.
- Step 5Remove the wheel.
- Step 6Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
- Step 7Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #18. Use a ratchet wrench.
- Step 8Unscrew the fasteners connecting the stabiliser link to the stabiliser bar. Use a combination spanner #18. Use XZN #6. Use a ratchet wrench.
- Step 9Remove the stabilizer rod.Replacement: anti roll bar links – SKODA SUPERB Estate (3T5). Professionals recommend:Examine stabiliser bushes. Replace them if needed.
- Step 10Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
- Step 11Install a new rod, tighten the fasteners. Use a combination spanner #18. Use a drive socket #18. Use HEX No.H5. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the SKODA Superb II Estate (3T5) model
Popular maintenance tutorials for Skoda Superb 3t5
Complete guides for changing the Drop links on different SKODA SUPERB models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your SKODA SUPERB Estate (3T5)
View more
- Prevent Engine Damage: How to Identify Rocker Cover Gasket Issues and Proper Replacement | AUTODOC
- #DIY guide: Changing your car's color with a spray can | AUTODOC tips
- Top 5 mistakes when replacing spark plugs | AUTODOC tips
- Don’t Replace, Restore: Fixing Damaged Threads at Home
Most commonly replaced car parts on SKODA SUPERB
Time to replace parts? Get even better deals in our Shop app.

SCAN ME