Important!
This replacement procedure can be used for:
SKODA SUPERB Estate (3V5) 1.4 TSI, SKODA SUPERB Estate (3V5) 1.4 TSI, SKODA SUPERB Estate (3V5) 2.0 TSI, SKODA SUPERB Estate (3V5) 1.6 TDI, SKODA SUPERB Estate (3V5) 2.0 TDI, SKODA SUPERB Estate (3V5) 2.0 TDI, SKODA SUPERB Estate (3V5) 2.0 TDI 4x4, SKODA SUPERB Estate (3V5) 1.4 TSI 4x4, SKODA SUPERB Estate (3V5) 1.8 TSI, SKODA SUPERB Estate (3V5) 2.0 TDI 4x4, SKODA SUPERB Estate (3V5) 2.0 TSI 4x4, SKODA SUPERB Estate (3V5) 1.5 TSi, SKODA SUPERB Estate (3V5) 2.0 TSI 4x4, SKODA SUPERB Estate (3V5) 2.0 TSI, SKODA SUPERB Estate (3V5) 1.4 TSI iV, SKODA SUPERB Estate (3V5) 2.0 TDI 4x4, SKODA SUPERB Estate (3V5) 2.0 TDI, SKODA SUPERB Estate (3V5) 2.0 TDI View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for SUPERB Estate (3V5) and other SKODA models
Alternative products
How to change Anti-roll bar link on Skoda Superb 3v5 2.0 TDI – step-by-step instructions for straightforward car repair Anti-roll bar link
Tools
Replacement: anti roll bar links – SKODA SUPERB Estate (3V5). List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Ceramic grease
Copper grease
Torque wrench
Combination spanner #18
Combination spanner #19
Drive socket # 18
Drive socket # 19
XZN socket bit #6
HEX bit No.H5
Wheel impact socket #17
Ratchet wrench
Wheel chock
AUTODOC recommends:
  • Replace the stabiliser links on SKODA SUPERB Estate (3V5) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • Please note: all work on the car – SKODA SUPERB Estate (3V5) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Anti Roll Bar Links on Skoda Superb 3v5 2015 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the car.
    Replacement: anti roll bar links – SKODA SUPERB Estate (3V5). Professionals recommend:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
    Step 4
    How to replace SKODA SUPERB Estate (3V5) 2.0 TDI 2016 Anti Roll Bar Links - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. SKODA SUPERB Estate (3V5)
  3. Step 5
    Skoda Superb 3v5 2.0 TDI 4x4 2017 Anti Roll Bar Links replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Anti Roll Bar Links on SKODA SUPERB Estate (3V5) 2.0 TSI 4x4 2018 by yourself
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove SKODA SUPERB 1.4 TSI 2019 Anti Roll Bar Links - online easy-to-follow instructions
    Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #18. Use XZN #6. Use a ratchet wrench.
  6. Step 8
    How to replace Anti Roll Bar Links on SKODA SUPERB Estate (3V5) 2020: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #18. Use XZN #6. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Anti Roll Bar Links replacement on Skoda Superb 3v5 2.0 TSI 2021 - download illustrated guide
    Remove the stabiliser link.
    Replacement: anti roll bar links – SKODA SUPERB Estate (3V5). Tip from AUTODOC experts:
    Examine stabiliser bushes. Replace them if needed.
  8. Step 10
    Need to know how to renew Anti Roll Bar Links on SKODA SUPERB 2022? This free workshop manual will help you to do it yourself
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
  9. Step 11
    Changing of Anti Roll Bar Links on Skoda Superb 3v5 2023 won't be an issue if you follow this illustrated step-by-step guide
    Install a new stabiliser link and tighten the fasteners. Use a combination spanner #19. Use HEX No.H5. Use a ratchet wrench.
  10. Step 12
    SKODA SUPERB 2.0 TDI Anti Roll Bar Links replacement: online guides and video tutorials
    Tighten the fastener connecting the stabilizer link to the shock strut. Use a drive socket #19. Use a torque wrench. Tighten it to 65 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the SKODA Superb III Estate (3V5) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY SKODA SUPERB Estate (3V5) Anti Roll Bar Links replacement - online guide
Tips & tricks for your SKODA SUPERB Estate (3V5)
View more
  • How to change Drop links on SKODA SUPERB Estate (3V5) 1.6 TDI - replacement tricks
    5 more brake repair mistakes | Stop making these brake repair mistakes
  • Changing Stabilizer link Skoda Superb 3v5 2.0 TDI - Replacement Tips
    The most common problems when buying a used car | AUTODOC
  • Maintenance Hacks - SKODA SUPERB Estate (3V5) 2.0 TDI 4x4 Sway bar link replacement guide
    How to Use Sandblasting Equipment: Step-by-Step Guide | AUTODOC Tips
  • Replace Drop link on Skoda Superb 3v5 - free video tips
    How to Fix a Squealing Belt: Causes & Solutions | AUTODOC Expert Tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
SKODA SUPERB Estate (3V5) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME