Disclaimer
How to change front anti roll bar links on SEAT Arona (KJ7) – replacement guide
downloads:
7
Views:
63
Important!
This replacement procedure can be used for:
SEAT Arona (KJ7) 1.0 TSI, SEAT Arona (KJ7) 1.0 TGi, SEAT Arona (KJ7) 1.6 SRE, SEAT Arona (KJ7) 1.6 TDI, SEAT Arona (KJ7) 1.6 TDI, SEAT Arona (KJ7) 1.5 TSI, SEAT Arona (KJ7) 1.0 TSI, SEAT Arona (KJ7) 1.0 TSI … View more
The steps may slightly vary depending on the car design.
SEAT Arona (KJ7) 1.0 TSI, SEAT Arona (KJ7) 1.0 TGi, SEAT Arona (KJ7) 1.6 SRE, SEAT Arona (KJ7) 1.6 TDI, SEAT Arona (KJ7) 1.6 TDI, SEAT Arona (KJ7) 1.5 TSI, SEAT Arona (KJ7) 1.0 TSI, SEAT Arona (KJ7) 1.0 TSI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for Arona (KJ7) and other SEAT models
Anti-roll bar link
Anti-roll bar link
Anti-roll bar link for Arona (KJ7) Petrol/Natural Gas (CNG) (90 hp)
Anti-roll bar link for Arona (KJ7) Petrol (110 hp)
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #17
Drive socket # 16
Drive socket # 17
HEX bit No.H5.
Wheel impact socket #17
Ratchet wrench
Torque wrench
Wheel chock
Replacement: anti roll bar links – SEAT ARONA (KJ7). AUTODOC experts recommend:
- Replace the stabiliser links on SEAT ARONA (KJ7) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – SEAT ARONA (KJ7). Recommended sequence of steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. SEAT ARONA (KJ7) - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #16. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #16. Use a ratchet wrench. - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – SEAT ARONA (KJ7). Tip from AUTODOC experts:Examine stabiliser bushes. Replace them if needed. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 11
Install a new rod, tighten the fasteners. Use a combination spanner #17. Use HEX No.H5.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the SEAT Arona (KJ7) model.
Popular maintenance tutorials for Seat Arona
Free download PDF
1.37 MB
Free download PDF2.79 MB
Free download PDF1.53 MB
Free download PDF1.38 MB
Free download PDF2.04 MB
Free download PDF675.84 KB
Complete guides for changing the Drop links on different SEAT ARONA models
Free download PDF972.8 KB
Free download PDF1.19 MB
Free download PDF1.33 MB
Free download PDF1.41 MB
Free download PDF1.41 MB
Free download PDF1.13 MB
Your profile is your personal assistant.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- - scan the QR code
- - download from App Store
- - download from Google Play
Tips & tricks for your SEAT Arona (KJ7)
View more
Why do your brakes squeak? | AUTODOC tips
Checking the starter without removing it | AUTODOC tips
Coolant comparison test | AUTODOC
Top 5 reasons why your car squeals | AUTODOC Tips
