
Disclaimer
How to change front anti roll bar links on OPEL Combo C Tour – replacement guide
downloads:
2
Views:
11
Important!
This replacement procedure can be used for:
OPEL COMBO Tour 1.6, OPEL COMBO Tour 1.7 DI 16V, OPEL COMBO Tour 1.7 DTI 16V, OPEL COMBO Tour 1.4, OPEL COMBO Tour 1.3 CDTI 16V, OPEL COMBO Tour 1.3 CDTI 16V, OPEL COMBO Tour 1.6 CNG, OPEL COMBO Tour 1.7 CDTI 16V, OPEL COMBO Tour 1.6 CNG … View more
The steps may slightly vary depending on the car design.
OPEL COMBO Tour 1.6, OPEL COMBO Tour 1.7 DI 16V, OPEL COMBO Tour 1.7 DTI 16V, OPEL COMBO Tour 1.4, OPEL COMBO Tour 1.3 CDTI 16V, OPEL COMBO Tour 1.3 CDTI 16V, OPEL COMBO Tour 1.6 CNG, OPEL COMBO Tour 1.7 CDTI 16V, OPEL COMBO Tour 1.6 CNG … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for COMBO Tour and other OPEL models
Anti-roll bar link
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #17
Combination spanner #18
Drive socket # 8
Drive socket # 19
Wheel impact socket #17
Ratchet wrench
Torque wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on OPEL COMBO Tour in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – OPEL COMBO Tour. Recommended sequence of steps:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the front of the car and secure on supports.Step 4Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. OPEL COMBO Tour
- Step 5Remove the wheel.
- Step 6Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
- Step 7Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #18. Use a drive socket #8. Use a ratchet wrench.
- Step 8Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #18. Use a drive socket #8. Use a ratchet wrench.
- Step 9Remove the stabilizer rod.Replacement: anti roll bar links – OPEL COMBO Tour. Tip from AUTODOC experts:Examine stabiliser bushes. Replace them if needed.
- Step 10Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
- Step 11Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the OPEL Combo C Tour model
Popular maintenance tutorials for Opel Combo C Tour
Complete guides for changing the Drop links on different OPEL COMBO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your OPEL COMBO Tour
View more
- Revitalize Your Car Interior: DIY Steering Wheel Cover with AUTODOC Tips
- Preventing Engine Failure: Head Gasket Inspection Tutorial | AUTODOC
- Top 5 Car Interior Cleaning Mistakes You Should Avoid | AUTODOC Tips
- Don’t Replace, Just Polish! Headlight Restoration with AUTODOC
Most commonly replaced car parts on OPEL COMBO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME