Disclaimer
How to change front anti roll bar links on MERCEDES-BENZ E-Class Coupe (C207) – replacement guide
downloads:
13
Views:
168
Important!
This replacement procedure can be used for:
MERCEDES-BENZ E-Class Coupe (C207) E 350 CDI (207.323), MERCEDES-BENZ E-Class Coupe (C207) E 300 (207.355), MERCEDES-BENZ E-Class Coupe (C207) E 350 (207.359), MERCEDES-BENZ E-Class Coupe (C207) E 500 (207.373), MERCEDES-BENZ E-Class Coupe (C207) E 350 (207.356), MERCEDES-BENZ E-Class Coupe (C207) E 250 CGI (207.347), MERCEDES-BENZ E-Class Coupe (C207) E 350 CGI (207.357), MERCEDES-BENZ E-Class Coupe (C207) E 500 (207.372), MERCEDES-BENZ E-Class Coupe (C207) E 250 CDI / BlueTEC / d (207.303, 207.304), MERCEDES-BENZ E-Class Coupe (C207) E 350 CDI (207.322), MERCEDES-BENZ E-Class Coupe (C207) E 220 CDI / d (207.302, 207.301), MERCEDES-BENZ E-Class Coupe (C207) E 200 CGI (207.348), MERCEDES-BENZ E-Class Coupe (C207) E 400 (207.365), MERCEDES-BENZ E-Class Coupe (C207) E 250 (207.336), MERCEDES-BENZ E-Class Coupe (C207) E 200 (207.334), MERCEDES-BENZ E-Class Coupe (C207) E 350 BlueTEC (207.326), MERCEDES-BENZ E-Class Coupe (C207) E 350 4-matic (207.388), MERCEDES-BENZ E-Class Coupe (C207) E 220 BlueTEC (207.301), MERCEDES-BENZ E-Class Coupe (C207) E 350 BlueTEC / d (207.326), MERCEDES-BENZ E-Class Coupe (C207) E 320 (207.362), MERCEDES-BENZ E-Class Coupe (C207) E 400 (207.361), MERCEDES-BENZ E-Class Coupe (C207) E 220 CDI (207.302) … View more
The steps may slightly vary depending on the car design.
MERCEDES-BENZ E-Class Coupe (C207) E 350 CDI (207.323), MERCEDES-BENZ E-Class Coupe (C207) E 300 (207.355), MERCEDES-BENZ E-Class Coupe (C207) E 350 (207.359), MERCEDES-BENZ E-Class Coupe (C207) E 500 (207.373), MERCEDES-BENZ E-Class Coupe (C207) E 350 (207.356), MERCEDES-BENZ E-Class Coupe (C207) E 250 CGI (207.347), MERCEDES-BENZ E-Class Coupe (C207) E 350 CGI (207.357), MERCEDES-BENZ E-Class Coupe (C207) E 500 (207.372), MERCEDES-BENZ E-Class Coupe (C207) E 250 CDI / BlueTEC / d (207.303, 207.304), MERCEDES-BENZ E-Class Coupe (C207) E 350 CDI (207.322), MERCEDES-BENZ E-Class Coupe (C207) E 220 CDI / d (207.302, 207.301), MERCEDES-BENZ E-Class Coupe (C207) E 200 CGI (207.348), MERCEDES-BENZ E-Class Coupe (C207) E 400 (207.365), MERCEDES-BENZ E-Class Coupe (C207) E 250 (207.336), MERCEDES-BENZ E-Class Coupe (C207) E 200 (207.334), MERCEDES-BENZ E-Class Coupe (C207) E 350 BlueTEC (207.326), MERCEDES-BENZ E-Class Coupe (C207) E 350 4-matic (207.388), MERCEDES-BENZ E-Class Coupe (C207) E 220 BlueTEC (207.301), MERCEDES-BENZ E-Class Coupe (C207) E 350 BlueTEC / d (207.326), MERCEDES-BENZ E-Class Coupe (C207) E 320 (207.362), MERCEDES-BENZ E-Class Coupe (C207) E 400 (207.361), MERCEDES-BENZ E-Class Coupe (C207) E 220 CDI (207.302) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for E-Class Coupe (C207) and other MERCEDES-BENZ models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Ceramic grease
Copper grease
Torque wrench
Combination spanner #18
Drive socket # 18
Drive socket # 19
Torx bit T40
Wheel impact socket #17
Ratchet wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on MERCEDES-BENZ E-CLASS Coupe (C207) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- Please note: all work on the car – MERCEDES-BENZ E-CLASS Coupe (C207) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the car.Replacement: anti roll bar links – MERCEDES-BENZ E-CLASS Coupe (C207). Tip from AUTODOC:If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. MERCEDES-BENZ E-CLASS Coupe (C207) - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #18. Use Torx T40. - Step 8
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #18. Use a ratchet wrench. - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – MERCEDES-BENZ E-CLASS Coupe (C207). Tip:Examine stabiliser bushes. Replace them if needed. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 11
Ιnstall the transverse stabilizer link. - Step 12
Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #19. Use a torque wrench. Tighten it to 98 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ E-Class Coupe (C207) model
Popular maintenance tutorials for Mercedes C207
Complete guides for changing the Drop links on different MERCEDES-BENZ E-CLASS models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your MERCEDES-BENZ E-Class Coupe (C207)
View more
Regain Your Confidence on the Road: Easy Headlight Restoration Tips
DIY manual gearbox restoration | Drivetrain restoration – Part 3
DIY starter repair | AUTODOC tips
Why Checking Your Oil is Crucial for Engine Performance
Most commonly replaced car parts on MERCEDES-BENZ E-CLASS
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





























