Disclaimer
How to change front anti roll bar links on HONDA CIVIC VII Coupe (EM2) – replacement guide
downloads:
0
Views:
6
Important!
This replacement procedure can be used for:
HONDA CIVIC VII Coupe (EM2) 1.7, HONDA CIVIC VII Coupe (EM2) 1.7, HONDA CIVIC VII Coupe (EM2) 1.7, HONDA CIVIC VII Coupe (EM2) 1.7 i VTEC (EM2), HONDA CIVIC VII Coupe (EM2) 1.7 i (EM2), HONDA CIVIC VII Coupe (EM2) 1.6 i (EM1) … View more
The steps may slightly vary depending on the car design.
HONDA CIVIC VII Coupe (EM2) 1.7, HONDA CIVIC VII Coupe (EM2) 1.7, HONDA CIVIC VII Coupe (EM2) 1.7, HONDA CIVIC VII Coupe (EM2) 1.7 i VTEC (EM2), HONDA CIVIC VII Coupe (EM2) 1.7 i (EM2), HONDA CIVIC VII Coupe (EM2) 1.6 i (EM1) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for CIVIC VII Coupe (EM2) and other HONDA models
Anti-roll bar link
Anti-roll bar link
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #14
HEX bit no.H6.
Wheel impact socket #19
Ratchet wrench
Torque wrench
Crow bar
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on HONDA CIVIC VII Coupe (EM2) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- Please note: all work on the car – HONDA CIVIC VII Coupe (EM2) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. HONDA CIVIC VII Coupe (EM2) - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #14 (2 pieces). - Step 8
Unscrew the fastener connecting the stabilizer link to the control arm. Use a combination spanner #14 (2 pieces). - Step 9
Remove the stabilizer rod. - Step 10Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.Step 11
Ιnstall the transverse stabilizer link. Use a crowbar.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the HONDA Civic VII Coupe (EM2) model.
Popular maintenance tutorials for Honda Civic EM2
Free download PDF
2.37 MB
Free download PDF1.46 MB
Free download PDF2.2 MB
Free download PDF1.98 MB
Free download PDF1.63 MB
Free download PDF1.18 MB
Complete guides for changing the Drop links on different HONDA CIVIC models
Free download PDF1.21 MB
Free download PDF1.13 MB
Free download PDF1.19 MB
Free download PDF972.8 KB
Free download PDF1.14 MB
Your profile is your personal assistant.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- - scan the QR code
- - download from App Store
- - download from Google Play
Tips & tricks for your HONDA CIVIC VII Coupe (EM2)
View more
How to save when buying car parts
5 tools that make car repair incredibly simple | AUTODOC tips
How to unlock your car without a key | AUTODOC tips
Top 6 products for enhancing your car | AUTODOC tips
