Disclaimer
How to change front anti roll bar links on BMW 1 Convertible (E88) – replacement guide
downloads:
1
Views:
9
Important!
This replacement procedure can be used for:
BMW 1 Convertible (E88) 120i, BMW 1 Convertible (E88) 125i, BMW 1 Convertible (E88) 118i, BMW 1 Convertible (E88) 135i, BMW 1 Convertible (E88) 120 d, BMW 1 Convertible (E88) 118 d, BMW 1 Convertible (E88) 123 d, BMW 1 Convertible (E88) 120 i, BMW 1 Convertible (E88) 120 d, BMW 1 Convertible (E88) 118 d, BMW 1 Convertible (E88) 128i, BMW 1 Convertible (E88) 120 i, BMW 1 Convertible (E88) 135 i, BMW 1 Convertible (E88) 120 d, BMW 1 Convertible (E88) 118 i … View more
The steps may slightly vary depending on the car design.
BMW 1 Convertible (E88) 120i, BMW 1 Convertible (E88) 125i, BMW 1 Convertible (E88) 118i, BMW 1 Convertible (E88) 135i, BMW 1 Convertible (E88) 120 d, BMW 1 Convertible (E88) 118 d, BMW 1 Convertible (E88) 123 d, BMW 1 Convertible (E88) 120 i, BMW 1 Convertible (E88) 120 d, BMW 1 Convertible (E88) 118 d, BMW 1 Convertible (E88) 128i, BMW 1 Convertible (E88) 120 i, BMW 1 Convertible (E88) 135 i, BMW 1 Convertible (E88) 120 d, BMW 1 Convertible (E88) 118 i … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for 1 Convertible (E88) and other BMW models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #17
Drive socket # 16
Wheel impact socket #17
Ratchet wrench
Torque wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on BMW 1 Convertible (E88) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- Please note: all work on the car – BMW 1 Convertible (E88) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. BMW 1 Convertible (E88) - Step 5
Remove the wheel. - Step 6Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.Step 7
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #17. Use a drive socket #16. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17 (2 pieces). - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – BMW 1 Convertible (E88). Tip from AUTODOC experts:Examine stabiliser bushes. Replace them if needed. - Step 10Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.Step 11
Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the BMW 1 Convertible (E88) model
Popular maintenance tutorials for BMW E88
Complete guides for changing the Drop links on different BMW 1 SERIES models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your BMW 1 Convertible (E88)
View more
Top 5 possible reasons your car is shaking or vibrating
The Fast and Easy Way to Fix a Broken Wheel Stud | AUTODOC tips
The most common problems when buying a used car | AUTODOC
DIY car soundproofing | AUTODOC tips
Most commonly replaced car parts on BMW 1 SERIES
Time to replace parts? Get even better deals in our Shop app.

SCAN ME



























