
Disclaimer
How to change front anti roll bar links on AUDI COUPE (81, 85) – replacement guide
downloads:
3
Views:
31
Important!
This replacement procedure can be used for:
AUDI COUPE (81, 85) 2.3 quattro … View more
The steps may slightly vary depending on the car design.
AUDI COUPE (81, 85) 2.3 quattro … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for COUPE (81, 85) and other AUDI models
Anti-roll bar link
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
High-temperature ceramic grease
Torque wrench
Combination spanner #16
Combination spanner #17
Drive socket # 17
Wheel impact socket #17
Ratchet wrench
Wheel chock
Replacement: anti roll bar links – AUDI COUPE (81, 85). AUTODOC recommends:
- Replace the stabiliser links on AUDI COUPE (81, 85) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- Please note: all work on the car – AUDI COUPE (81, 85) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the front of the car and secure on supports.Step 4Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. AUDI COUPE (81, 85)
- Step 5Remove the wheel.
- Step 6Clean all joints of the stabiliser link. Use a wire brush. Use WD-40 spray.
- Step 7Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #16. Use a drive socket #17. Use a ratchet wrench.
- Step 8Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use a combination spanner #17.
- Step 9Remove the stabilizer rod.Replacement: anti roll bar links – AUDI COUPE (81, 85). AUTODOC experts recommend:Examine the stabiliser bushes. Replace them if necessary.
- Step 10Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
- Step 11Install a new stabiliser link and tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the AUDI Coupe B2 (81, 85) model
Popular maintenance tutorials for Audi Coupe B2
Complete guides for changing the Drop links on different AUDI COUPE models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your AUDI COUPE (81, 85)
View more
- Can You Hear Your Brakes Squeaking? Learn the Causes and DIY Solutions! | AUTODOC Tips
- DIY jack restoration | AUTODOC tips
- #DIY Guide: How to Fix a Cracked Windscreen Without a Garage Visit
- TOP 6 WD-40 lifehacks | AUTODOC tips
Most commonly replaced car parts on AUDI COUPE
Time to replace parts? Get even better deals in our Shop app.

SCAN ME