Disclaimer
How to change front anti roll bar links on ALFA ROMEO Spider (939) – replacement guide
downloads:
0
Views:
12
Important!
This replacement procedure can be used for:
ALFA ROMEO SPIDER (939) 2.0 JTDM (939DXQ1B), ALFA ROMEO SPIDER (939) 2.2 JTS (939EXB1B, 939EXB11), ALFA ROMEO SPIDER (939) 3.2 JTS Q4 (939EXG2B, 939EXG22), ALFA ROMEO SPIDER (939) 2.4 JTDM (939EXD1B, 939EXD12), ALFA ROMEO SPIDER (939) 2.4 JTDM (939DXM1B, 939EXM1B), ALFA ROMEO SPIDER (939) 3.2 JTS (939EXG2B), ALFA ROMEO SPIDER (939) 1.8 TBi (939DXN1B), ALFA ROMEO SPIDER (939) 2.0 JTDM (939DXP1B, 939EXP1B) … View more
The steps may slightly vary depending on the car design.
ALFA ROMEO SPIDER (939) 2.0 JTDM (939DXQ1B), ALFA ROMEO SPIDER (939) 2.2 JTS (939EXB1B, 939EXB11), ALFA ROMEO SPIDER (939) 3.2 JTS Q4 (939EXG2B, 939EXG22), ALFA ROMEO SPIDER (939) 2.4 JTDM (939EXD1B, 939EXD12), ALFA ROMEO SPIDER (939) 2.4 JTDM (939DXM1B, 939EXM1B), ALFA ROMEO SPIDER (939) 3.2 JTS (939EXG2B), ALFA ROMEO SPIDER (939) 1.8 TBi (939DXN1B), ALFA ROMEO SPIDER (939) 2.0 JTDM (939DXP1B, 939EXP1B) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for SPIDER (939) and other ALFA ROMEO models
Anti-roll bar link
Alternative products
Anti-roll bar link
Wire brush
WD-40 spray
Copper grease
Combination spanner #18
Drive socket # 18
HEX bit No.H6
Wheel impact socket #17
Torque wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on ALFA ROMEO SPIDER (939) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – ALFA ROMEO SPIDER (939). Recommended sequence of steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. ALFA ROMEO SPIDER (939) - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Undo the fastening nut that attaches the stabilizer link to the shock absorber fork. Use a drive socket #18. - Step 8
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 9
Unscrew the fasteners connecting the stabiliser link to the stabiliser bar. Use a combination spanner #18. Use HEX No.H6. - Step 10
Remove the stabilizer rod.Replacement: anti roll bar links – ALFA ROMEO SPIDER (939). Tip from AUTODOC experts:Examine stabiliser bushes. Replace them if needed. - Step 11
Install a new rod, tighten the fasteners. Use a combination spanner #18. Use HEX No.H6.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the ALFA ROMEO Spider (939) model
Popular maintenance tutorials for Alfa Romeo Spider 939
Free download PDF
3.64 MB
Free download PDF2.4 MB
Free download PDF3.52 MB
Free download PDF1.28 MB
Free download PDF1.89 MB
Free download PDF1.57 MB
Complete guides for changing the Drop links on different ALFA ROMEO SPIDER models
- Free download PDF1.28 MB
Free download PDF972.8 KB
Free download PDF1.52 MB
Free download PDF1.45 MB
Free download PDF1.52 MB
Free download PDF1.36 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your ALFA ROMEO SPIDER (939)
View more
Top 5 reasons why your car squeals | AUTODOC Tips
Stop Rust Before It Starts: Top 5 Tips for Car Body Protection | AUTODOC Insights
How to Swap an M50 Engine in a BMW E30 Turbo | AUTODOC Project
Prevent Breakdowns: Key Car Checks After Winter | AUTODOC Guide
Most commonly replaced car parts on ALFA ROMEO SPIDER
Time to replace parts? Get even better deals in our Shop app.
SCAN ME