Disclaimer
How to change front ABS sensor on VW Golf VI Convertible (517) – replacement guide
downloads:
2
Views:
16
Important!
This replacement procedure can be used for:
VW Golf VI Convertible (517) 1.2 TSI, VW Golf VI Convertible (517) 1.4 TSI, VW Golf VI Convertible (517) 1.4 TSI, VW Golf VI Convertible (517) 2.0 GTI, VW Golf VI Convertible (517) 1.6 TDI, VW Golf VI Convertible (517) 2.0 TDI, VW Golf VI Convertible (517) 1.2 TSI 16V, VW Golf VI Convertible (517) 2.0 R, VW Golf VI Convertible (517) 1.4 TSI, VW Golf VI Convertible (517) 1.4 TSI, VW Golf VI Convertible (517) 2.0 TDI … View more
The steps may slightly vary depending on the car design.
VW Golf VI Convertible (517) 1.2 TSI, VW Golf VI Convertible (517) 1.4 TSI, VW Golf VI Convertible (517) 1.4 TSI, VW Golf VI Convertible (517) 2.0 GTI, VW Golf VI Convertible (517) 1.6 TDI, VW Golf VI Convertible (517) 2.0 TDI, VW Golf VI Convertible (517) 1.2 TSI 16V, VW Golf VI Convertible (517) 2.0 R, VW Golf VI Convertible (517) 1.4 TSI, VW Golf VI Convertible (517) 1.4 TSI, VW Golf VI Convertible (517) 2.0 TDI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – ABS Sensor for Golf VI Convertible (517) and other VW models
Alternative products

Wire brush
Nylon cleaning brush
WD-40 spray
Brake cleaner
Electronic spray
Multipurpose grease
Copper grease
Torque wrench
HEX bit No.H5
Wheel impact socket #17
Ratchet wrench
Flat screwdriver
Wheel chock
Replacement: ABS sensor – VW GOLF VI Convertible (517). AUTODOC experts recommend:
- All work should be done with the engine stopped.
Replacement: ABS sensor – VW GOLF VI Convertible (517). Use the following procedure:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VW GOLF VI Convertible (517) - Step 5
Remove the wheel. - Step 6
Detach the ABS sensor connector. - Step 7
Clean the ABS sensor fastener. Use a wire brush. Use WD-40 spray. - Step 8
Unscrew the ABS sensor fastener. Use HEX No.H5. Use a ratchet wrench. - Step 9
Disconnect the ABS sensor. - Step 10
Clean the ABS sensor mounting seat. Use a wire brush. Use WD-40 spray. - Step 11
Treat the ABS sensor fastener. Use a multipurpose grease. Use a flat screwdriver. - Step 12
Connect the ABS sensor. - Step 13
Tighten the fastener that connects the ABS sensor to the steering knuckle. Use HEX No.H5. Use a torque wrench. Tighten it to 7 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Golf VI Convertible (517) model
Popular maintenance tutorials for VW Golf 6 Convertible
Complete guides for changing the Wheel speed sensor on different VW GOLF models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW Golf VI Convertible (517)
View more
What to do if the ABS light comes on: DIY Diagnostics Tips
TOP 5 mistakes during DIY oil change | AUTODOC tips
Why does it burn oil? The main cause of oil consumption in EA888 Gen 1
Understanding Airbag Light Warnings | Essential Tips for Car Safety
Most commonly replaced car parts on VW GOLF
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


























