
Disclaimer
How to change front ABS sensor on VAUXHALL Vivaro Platform / Chassis (X83) – replacement guide
downloads:
0
Views:
0
Important!
This replacement procedure can be used for:
VAUXHALL Vivaro Platform / Chassis (X83) 2.5 CDTI, VAUXHALL Vivaro Platform / Chassis (X83) 2.0 CDTI, VAUXHALL Vivaro Platform / Chassis (X83) 2.0 CDTI, VAUXHALL Vivaro Platform / Chassis (X83) 2.0 ECOTEC … View more
The steps may slightly vary depending on the car design.
VAUXHALL Vivaro Platform / Chassis (X83) 2.5 CDTI, VAUXHALL Vivaro Platform / Chassis (X83) 2.0 CDTI, VAUXHALL Vivaro Platform / Chassis (X83) 2.0 CDTI, VAUXHALL Vivaro Platform / Chassis (X83) 2.0 ECOTEC … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – ABS Sensor for Vivaro Platform / Chassis (X83) and other VAUXHALL models
Alternative products

Wire brush
WD-40 spray
All-purpose cleaning spray
Electronic spray
Ceramic grease
Torque wrench
18 mm combination spanner
21 mm combination spanner
16 mm socket
18 mm socket
19 mm socket
21 mm socket
32 mm socket
T40 Torx bit
19 mm wheel impact socket
Ratchet wrench or power tool for removal/installation of threaded fasteners
Tommy bar
Hydraulic press
Bush and bearing driver set
Bearing separator
Ball joint separator
Transmission jack or a second vehicle jack
Slotted screwdriver
Pin punch
Hammer
Car lift or jack with jack stands, and wheel chocks
Replacement: ABS sensor – VAUXHALL VIVARO Platform/Chassis (E7). AUTODOC recommends:
- All the work should be carried out with the engine switched off.
Replacement: ABS sensor – VAUXHALL VIVARO Platform/Chassis (E7). Recommended sequence of steps:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel fasteners. Use a 19 mm wheel impact socket. Use a tommy bar. - Step 3Raise the vehicle.Warning!If you are using a jack, make sure the car is parked on a hard, flat surface.Make sure to additionally secure the car with jack stands.Step 4
Unscrew the wheel fasteners.Replacement: ABS sensor – VAUXHALL VIVARO Platform/Chassis (E7). Professionals recommend:To avoid injury, hold up the wheel when unscrewing the fasteners. - Step 5
Remove the wheel. - Step 6
Remove the ABS sensor. - Step 7
Detach the ABS sensor wiring. - Step 8
Detach the vehicle connector from the ABS sensor connector. - Step 9
Remove the ABS sensor connector from its mounting seat on the vehicle. Use a slotted screwdriver. - Step 10
Treat the vehicle connector of the ABS sensor. Use an electronic spray. - Step 11
Secure the ABS sensor connector in its mounting seat on the vehicle.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VAUXHALL Vivaro Platform / Chassis (X83) model
Popular maintenance tutorials for VAUXHALL VIVARO Platform/Chassis (E7)
Complete guides for changing the Wheel speed sensor on different VAUXHALL VIVARO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VAUXHALL Vivaro Platform / Chassis (X83)
View more
Understanding Airbag Light Warnings | Essential Tips for Car Safety
Motorcycle fuel tank restoration
How to easily repair a punctured tyre | AUTODOC tips
Regain Your Confidence on the Road: Easy Headlight Restoration Tips
Most commonly replaced car parts on VAUXHALL VIVARO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME






























