Disclaimer
How to change engine oil and filter on RENAULT Megane CC (EZ) – replacement guide
downloads:
5
Views:
166
Recommended replacement interval for the part category Oil filter : 1 year / 20000 km
Important!
This replacement procedure can be used for:
RENAULT MEGANE CC (EZ0/1_) 1.6 16V Hi-Flex, RENAULT MEGANE CC (EZ0/1_) 1.6 16V (EZ0U, EZ1U) … View more
The steps may slightly vary depending on the car design.
RENAULT MEGANE CC (EZ0/1_) 1.6 16V Hi-Flex, RENAULT MEGANE CC (EZ0/1_) 1.6 16V (EZ0U, EZ1U) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Oil Filter for MEGANE CC (EZ0/1_) and other RENAULT models
Alternative products

Wire brush
All-purpose cleaning spray
Torque wrench
Square oil drain plug socket No.8
Oil filter cup socket #74-15F
Oil filter cup socket #76-12F
Ratchet wrench
Funnel
Fender cover
Replacement: engine oil and filter – RENAULT MEGANE CC (EZ0/1_). AUTODOC experts recommend:
- Replace the oil filter every time when changing motor oil.
- Wear gloves to prevent contact with hot liquid.
- Please note: all work on the car – RENAULT MEGANE CC (EZ0/1_) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Pull up the oil dipstick. - Step 4
Unscrew the oil filler plug. - Step 5Lift the car using a jack or place it over an inspection pit.Replacement: engine oil and filter – RENAULT MEGANE CC (EZ0/1_). AUTODOC experts recommend:The vehicle must be on even keel, and if it is at an angle, the drain plug must be at the lowest point.Step 6
Put a waste oil container with at least 5 l capacity under the drainage hole. - Step 7Clean the area of the oil pan drainage hole. Use a wire brush. Use all-purpose cleaning spray.Step 8
Unscrew the drain plug. Use square oil drain plug socket No.8 Use a ratchet wrench. - Step 9
Drain the used oil.Replacement: engine oil and filter – RENAULT MEGANE CC (EZ0/1_). Tip:Caution! The oil may be hot.Wait until the oil has completely drained from the drainage hole. - Step 10
Unscrew the oil filter. Use the 76/12-F socket. Use a ratchet wrench. - Step 11
Clean the oil filter seat. Use all-purpose cleaning spray. - Step 12
Lubricate the rubber seal of the new filter with a little amount of fresh oil. - Step 13
Screw the new filter into its place. Use the 74/15-F socket. Use a torque wrench. Tighten it to 20 nm torque. - Step 14
Clean the area of the oil pan drainage hole. Use all-purpose cleaning spray. - Step 15
Screw in the new drainage plug and tighten it. Use square oil drain plug socket No.8 Use a torque wrench. Tighten it to 28 nm torque. - Step 16
Clean the area of the oil pan drainage hole. Use all-purpose cleaning spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Megane CC (EZ) model
Popular maintenance tutorials for Renault Megane CC
Complete guides for changing the Oil filters on different RENAULT MEGANE models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT MEGANE CC (EZ0/1_)
View more
Why does it burn oil? The main cause of oil consumption in EA888 Gen 1
Kolbenschmidt plastic gauge overview
#DIY Tips for Fixing Your Car's Air Conditioning Issues | Don't Wait for Costly Repairs!
#DIY guide: Changing your car's color with a spray can | AUTODOC tips
Most commonly replaced car parts on RENAULT MEGANE
Time to replace parts? Get even better deals in our Shop app.

SCAN ME




























