Disclaimer
How to change engine oil and filter on NISSAN NAVARA Platform/Chassis (D22) diesel – replacement guide
downloads:
3
Views:
126
Recommended replacement interval for the part category Oil filter : 12 month / 15000 km
Important!
This replacement procedure can be used for:
NISSAN NAVARA Platform/Chassis (D22) 2.5 Di 4WD … View more
The steps may slightly vary depending on the car design.
NISSAN NAVARA Platform/Chassis (D22) 2.5 Di 4WD … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Oil Filter for NAVARA Platform/Chassis (D22) and other NISSAN models
Alternative products

All-purpose cleaning spray
Drive socket # 14
Ratchet wrench
Torque wrench
Oil drain pan
Funnel
Fender cover
Replacement: engine oil and filter – NISSAN NAVARA Platform/Chassis (D22). AUTODOC experts recommend:
- Replace the oil filter every time when changing motor oil.
- Wear gloves to prevent contact with hot liquid.
- Warning! Shut down the engine before starting any work – NISSAN NAVARA Platform/Chassis (D22).
Carry out replacement in the following order:
- Step 1Lift the car using a jack or place it over an inspection pit.Replacement: engine oil and filter – NISSAN NAVARA Platform/Chassis (D22). Tip:The vehicle must be on even keel, and if it is at an angle, the drain plug must be at the lowest point.Step 2Put a waste oil container with at least 6 l capacity under the drainage hole.Step 3
Unscrew the oil filter. - Step 4
Put the old oil filter in the container.AUTODOC recommends:Move up the container. The oil starts to drain out of the drainage hole immediately after you have removed the oil filter. - Step 5
Clean the oil filter seat. Screw the new filter into its place. - Step 6
Unscrew the drain plug. Use a drive socket #14. Use a ratchet wrench. - Step 7
Drain the used oil.Replacement: engine oil and filter – NISSAN NAVARA Platform/Chassis (D22). Tip from AUTODOC:Caution! The oil may be hot.Wait until the oil has completely drained from the drainage hole. - Step 8Clean the area of the oil pan drainage hole.Step 9
Screw in the new drainage plug and tighten it. Use a drive socket #14. Use a torque wrench. Tighten it to 25 Nm torque. - Step 10
Clean the area of the oil pan drainage hole. Use all-purpose cleaning spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the NISSAN Navara Platform/Chassis (D22) model
Popular maintenance tutorials for Nissan Navara D22 Platform
Complete guides for changing the Oil filters on different NISSAN NAVARA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your NISSAN NAVARA Platform/Chassis (D22)
View more
Top 5 reasons why your car squeals | AUTODOC Tips
How to Get the Best Deals on Car Parts | Save Money with AUTODOC
5 reasons why your car is making a knocking sound
How to unlock your car without a key | AUTODOC tips
Most commonly replaced car parts on NISSAN NAVARA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

























