Disclaimer
How to change engine oil and filter on Mercedes W203 V6 – replacement guide
downloads:
34
Views:
416
Recommended replacement interval for the part category Oil filter : 1 year / 15000 km
Important!
This replacement procedure can be used for:
MERCEDES-BENZ C-Class Saloon (W203) C 320 (203.064), MERCEDES-BENZ C-Class Saloon (W203) C 32 AMG Kompressor (203.065), MERCEDES-BENZ C-Class Saloon (W203) C 240 4-matic (203.081), MERCEDES-BENZ C-Class Saloon (W203) C 320 4-matic (203.084), MERCEDES-BENZ C-Class Saloon (W203) C 55 AMG (203.076), MERCEDES-BENZ C-Class Saloon (W203) C 280 (203.054), MERCEDES-BENZ C-Class Saloon (W203) C 280 4-matic (203.092), MERCEDES-BENZ C-Class Saloon (W203) C 350 (203.056), MERCEDES-BENZ C-Class Saloon (W203) C 350 4-matic (203.087), MERCEDES-BENZ C-Class Saloon (W203) C 230 (203.052) … View more
The steps may slightly vary depending on the car design.
MERCEDES-BENZ C-Class Saloon (W203) C 320 (203.064), MERCEDES-BENZ C-Class Saloon (W203) C 32 AMG Kompressor (203.065), MERCEDES-BENZ C-Class Saloon (W203) C 240 4-matic (203.081), MERCEDES-BENZ C-Class Saloon (W203) C 320 4-matic (203.084), MERCEDES-BENZ C-Class Saloon (W203) C 55 AMG (203.076), MERCEDES-BENZ C-Class Saloon (W203) C 280 (203.054), MERCEDES-BENZ C-Class Saloon (W203) C 280 4-matic (203.092), MERCEDES-BENZ C-Class Saloon (W203) C 350 (203.056), MERCEDES-BENZ C-Class Saloon (W203) C 350 4-matic (203.087), MERCEDES-BENZ C-Class Saloon (W203) C 230 (203.052) … View more
The steps may slightly vary depending on the car design.
How to change oil filter and engine oil on MERCEDES-BENZ W203 C-Class [TUTORIAL AUTODOC]

All the parts you need to replace – Oil Filter for C-Class Saloon (W203) and other MERCEDES-BENZ models
Alternative products

Wire brush
All-purpose cleaning spray
Torque wrench
Combination spanner #13
Drive socket # 8
Drive socket # 13
Oil filter cup socket 74/15F
Ratchet wrench
Oil drain pan
Funnel
Flat Screwdriver
Microfibre towel
Fender cover
Replacement: engine oil and filter – Mercedes W203 V6. Tip from AUTODOC:
- Replace the oil filter every time when changing motor oil.
- Use only new O-rings during installation.
- Wear gloves to prevent contact with hot liquid.
- Please note: all work on the car – Mercedes W203 V6 – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1
Open the hood. - Step 2
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car. - Step 3
Unscrew the oil filler plug. - Step 4
Lift the car using a jack or place it over an inspection pit.Replacement: engine oil and filter – Mercedes W203 V6. Professionals recommend:The vehicle must be on even keel, and if it is at an angle, the drain plug must be at the lowest point. - Step 5
Undo the fasteners of the oil pan lower cover. Use a drive socket #8. Use a ratchet wrench. - Step 6
Remove the oil pan cover. - Step 7
Put a waste oil container with at least 9 l capacity under the drainage hole. - Step 8
Clean the area of the oil pan drainage hole. Use a wire brush. Use all-purpose cleaning spray. - Step 9
Unscrew the drain plug. Use a combination spanner #13. Use a drive socket #13. Use a ratchet wrench. - Step 10
Drain the used oil.Replacement: engine oil and filter – Mercedes W203 V6. Tip from AUTODOC:Caution! The oil may be hot.Wait until the oil has completely drained from the drainage hole. - Step 11
Clean the oil filter housing cap. - Step 12
Unscrew the filter housing cap together with the old filter element. Use the 74/15F socket. Use a ratchet wrench. - Step 13Prepare a container for the old oil filter.Step 14
Put the old oil filter in the container.Replacement: engine oil and filter – Mercedes W203 V6. AUTODOC recommends:Move up the container. The oil starts to drain out of the drainage hole immediately after you have removed the oil filter. - Step 15Cover the oil filter housing with a microfibre towel to prevent dirt and foreign objects from getting into the system.Step 16
Detach the oil filter from the filter cover. - Step 17
Remove old o-rings from the oil filter cover. Use a flat screwdriver. - Step 18
Clean the oil filter housing cap. Use all-purpose cleaning spray. - Step 19
Install new O-rings and a new oil filter to their mounting seats on the filter cover.Please note!Make sure to install the filter correctly. Don't mix up the sides of the part. - Step 20Lubricate the rubber seal of the new filter with a little amount of fresh oil.Step 21Remove the microfibre towel from the oil filter housing.Step 22
Install a new oil filter housing cover and tighten it. Use the 74/15F socket. Use a torque wrench. Tighten it to 25 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 1
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ C-Class Saloon (W203) model
Popular maintenance tutorials for Mercedes W203
Complete guides for changing the Oil filters on different MERCEDES-BENZ C-CLASS models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your MERCEDES-BENZ C-Class Saloon (W203)
View more
How to Get the Best Deals on Car Parts | Save Money with AUTODOC
5 mistakes made when washing the engine | AUTODOC tips
TOP 5 mistakes during DIY oil change | AUTODOC tips
How to remove rust | AUTODOC tips
Most commonly replaced car parts on MERCEDES-BENZ C-CLASS
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


































