Disclaimer
How to change engine oil and filter on CITROËN C4 I Saloon – replacement guide
downloads:
5
Views:
61
Recommended replacement interval for the part category Oil filter : 2 year / 20000 km
Important!
This replacement procedure can be used for:
CITROËN C4 Saloon L 2.0 HDi … View more
The steps may slightly vary depending on the car design.
CITROËN C4 Saloon L 2.0 HDi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Oil Filter for C4 Saloon L and other CITROËN models
Alternative products

Wire brush
All-purpose cleaning spray
Torque wrench
Drive socket # 24
Oil filter cup socket 76-14F
Ratchet wrench
Oil drain pan
Funnel
Fender cover
Replacement: engine oil and filter – CITROËN C4 Saloon L. AUTODOC experts recommend:
- Replace the oil filter every time when changing motor oil.
- Wear gloves to prevent contact with hot liquid.
- Please note: all work on the car – CITROËN C4 Saloon L – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Unscrew the oil filler plug. - Step 4Lift the car using a jack or place it over an inspection pit.Replacement: engine oil and filter – CITROËN C4 Saloon L. Tip from AUTODOC:The vehicle must be on even keel, and if it is at an angle, the drain plug must be at the lowest point.Step 5
Put a waste oil container with at least 5 l capacity under the drainage hole. - Step 6
Clean the area of the oil pan drainage hole. Use a wire brush. Use all-purpose cleaning spray. - Step 7
Unscrew the drain plug. Use a drive socket #24. Use a ratchet wrench. - Step 8
Drain the used oil.Replacement: engine oil and filter – CITROËN C4 Saloon L. Professionals recommend:Caution! The oil may be hot.Wait until the oil has completely drained from the drainage hole. - Step 9
Clean the oil filter. Use all-purpose cleaning spray. - Step 10Unscrew the oil filter. Use the 76-14F socket. Use a ratchet wrench.Step 11
Remove the oil filter. - Step 12
Clean the oil filter seat. Use all-purpose cleaning spray. - Step 13
Lubricate the rubber seal of the new filter with a little amount of fresh oil. - Step 14
Install a new oil filter. - Step 15
Tighten the oil filter. Remember to observe the recommended tightening torque. Use the 76-14F socket. Use a torque wrench. Tighten it to 19 Nm torque.Replacement: engine oil and filter – CITROËN C4 Saloon L. Tip:Wait until the oil has completely drained from the drainage hole. - Step 16
Clean the area of the oil pan drainage hole. Use all-purpose cleaning spray. - Step 17
Screw in the new drainage plug and tighten it. Use a drive socket #24. Use a torque wrench. Tighten it to 28 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the CITROËN C4 I Saloon model
Popular maintenance tutorials for CITROËN C4 Saloon L
Complete guides for changing the Oil filters on different CITROËN C4 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your CITROËN C4 Saloon L
View more
Prevent Breakdowns: Key Car Checks After Winter | AUTODOC Guide
5 tools that make car repair incredibly simple | AUTODOC tips
Which Coolant is Best? Comparison Test | AUTODOC
Top 5 reasons why the suspension knocks | AUTODOC tips
Most commonly replaced car parts on CITROËN C4
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





























