Disclaimer
How to change distributor rotor on VW LT 40-55 I Platform / Chassis (293-909) – replacement guide
downloads:
0
Views:
7
Important!
This replacement procedure can be used for:
VW LT 40-55 I Platform / Chassis (293-909) 2.0 … View more
The steps may slightly vary depending on the car design.
VW LT 40-55 I Platform / Chassis (293-909) 2.0 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Distributor Rotor for LT 40-55 I Platform / Chassis (293-909) and other VW models
Alternative products

Electronic spray
Crow bar
Fender cover
Replacement: distributor rotor – VW LT 40-55 I Platform/Chassis (293-909). AUTODOC experts recommend:
- Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
- Thoroughly inspect the ignition distributor assembly. Replace any worn parts.
- Please note: all work on the car – VW LT 40-55 I Platform/Chassis (293-909) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Make marks on the distributor cap to indicate the installation order of the spark plug wires. - Step 4
Disconnect the spark plug wires from the distributor cap.Replacement: distributor rotor – VW LT 40-55 I Platform/Chassis (293-909). Tip from AUTODOC:Be careful to avoid damaging spark plug wires. - Step 5
Release the distributor cap clips. Use a crowbar. - Step 6
Remove the distributor cap.AUTODOC recommends:Replacement: distributor rotor – VW LT 40-55 I Platform/Chassis (293-909). Do not use excessive force when removing the part as this may damage it. - Step 7
Remove the ignition distributor rotor.Replacement: distributor rotor – VW LT 40-55 I Platform/Chassis (293-909). Professionals recommend:Do not apply excessive force when removing the part. Otherwise you may damage it. - Step 8
Install a new ignition distributor rotor.AUTODOC recommends:When installing, do not use excessive force to avoid damage to the part. - Step 9
Install the distributor cap.AUTODOC recommends:When installing, do not use excessive force to avoid damage to the part.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW LT 40-55 I Platform / Chassis (293-909) model
Popular maintenance tutorials for VW LT 55 Platform
Complete guides for changing the Ignition distributor rotor on different VW LT models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW LT 40-55 I Platform / Chassis (293-909)
View more
TOP 5 mistakes during DIY oil change | AUTODOC tips
TOP 8 mistakes car owners make | AUTODOC tips
Top 5 Mistakes to Avoid for Safe Engine Bay Repairs | AUTODOC Tips
DIY jack restoration | AUTODOC tips
Most commonly replaced car parts on VW LT
Time to replace parts? Get even better deals in our Shop app.

SCAN ME
























