Important!
This replacement procedure can be used for:
AUDI 80 (81, 85, B2) 1.3, AUDI 80 (81, 85, B2) 1.6, AUDI 80 (81, 85, B2) 1.6, AUDI 80 (81, 85, B2) 1.8, AUDI 80 (81, 85, B2) 1.8, AUDI 80 (81, 85, B2) 1.8 GTE, AUDI 80 (81, 85, B2) 1.8 CC quattro (85Q), AUDI 80 (81, 85, B2) 1.8 GTE quattro (85Q), AUDI 80 (81, 85, B2) 1.8 GTE quattro (85Q), AUDI 80 (81, 85, B2) 1.8, AUDI 80 (81, 85, B2) 1.8 GTE, AUDI 80 (81, 85, B2) 1.8 CC quattro (85Q) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Coolant Flange for 80 (81, 85, B2) and other AUDI models
Alternative products
How to change Coolant Flange on Audi 80 B2 1.8 – step-by-step instructions for straightforward car repair Coolant Flange
Tools
Replacement: сoolant flange – AUDI 80 (81, 85, B2). Tools you might need:
Torque wrench
Drive socket # 7
Drive socket # 10
Drive socket # 13
Ratchet wrench
Fluid container
Funnel
Fender cover
Replacement: сoolant flange – AUDI 80 (81, 85, B2). Tip from AUTODOC:
  • Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
  • Check the coolant condition and replace it if necessary.
  • Inspect the thermostat. Replace it if necessary.
  • All work should be done with the engine stopped.
Replacement: сoolant flange – AUDI 80 (81, 85, B2). Use the following procedure:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Coolant Flange on Audi 80 B2 1978 - free PDF and video manuals
    Unscrew the coolant reservoir cap.
  2. Step 4
    How to replace AUDI 80 (81, 85, B2) 1.8 1979 Coolant Flange - step-by-step manuals and video guides
    Prepare a container for fluids.
  3. Step 5
    Audi 80 B2 1.6 1980 Coolant Flange replacement: free workshop manuals
    Loosen the coolant hose clamp. Use a drive socket #7. Use a ratchet wrench.
  4. Step 6
    Changing Coolant Flange on AUDI 80 (81, 85, B2) 1.8 GTE 1981 by yourself
    Detach the coolant hose.
    Replacement: сoolant flange – AUDI 80 (81, 85, B2). Professionals recommend:
    Caution! Coolant may come out from the water pump channels and body.
  5. Step 7
    How to remove AUDI 80 1.6 TD 1982 Coolant Flange - online easy-to-follow instructions
    Drain the coolant from the engine.
    Replacement: сoolant flange – AUDI 80 (81, 85, B2). Tip from AUTODOC:
    Caution! The coolant can be very hot.Wear gloves to prevent contact with hot liquid.All work should be done with the engine stopped.Wait until the coolant has completely flowed out of the drain hole.
  6. Step 8
    How to replace Coolant Flange on AUDI 80 (81, 85, B2) 1983: download PDF manuals and video instructions
    Unscrew the thermostat housing fasteners. Use a drive socket #13. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Coolant Flange replacement on Audi 80 B2 2.0 1984 - download illustrated guide
    Remove the thermostat housing.
    AUTODOC recommends:
    Replacement: сoolant flange – AUDI 80 (81, 85, B2). Do not use excessive force when removing the part as this may damage it.
  8. Step 10
    Need to know how to renew Coolant Flange on AUDI 80 1985? This free workshop manual will help you to do it yourself
    Remove the thermostat.
    Replacement: сoolant flange – AUDI 80 (81, 85, B2). AUTODOC experts recommend:
    Do not apply excessive force when removing the part. Otherwise you may damage it.Caution! Coolant may leak out of the coolant lines and thermostat housing.
  9. Step 11
    Changing of Coolant Flange on Audi 80 B2 1986 won't be an issue if you follow this illustrated step-by-step guide
    Install the thermostat.
    AUTODOC recommends:
    Caution! Do not use excessive force during installation. This may damage the fasteners of the car. AUDI 80 (81, 85, B2)
  10. Step 12
    AUDI 80 1.8 Coolant Flange replacement: online guides and video tutorials
    Install a new thermostat housing.
  11. Step 13
    Replacing Coolant Flange on Audi 80 B2 1979 1.8 by yourself
    Tighten the thermostat housing fasteners. Use a drive socket #10. Use a torque wrench. Tighten it to 13 nm torque.
  12. Step 14
    80 (81, 85, B2) 1.6 TD 1980 Coolant Flange DIY replacement workshop manual
    Attach the coolant hose.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the AUDI 80 B2 (81, 85) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY AUDI 80 (81, 85, B2) Coolant Flange replacement - online guide
Tips & tricks for your AUDI 80 (81, 85, B2)
View more
  • How to change Water outlet on AUDI 80 (81, 85, B2) 2.2 quattro - replacement tricks
    DIY engine block coffee table
  • Changing Water outlet Audi 80 B2 1.8 - Replacement Tips
    Fuse Replacement Made Simple: Step-by-Step Guide | AUTODOC
  • Maintenance Hacks - AUDI 80 (81, 85, B2) 1.6 Water outlet replacement guide
    Regain Your Confidence on the Road: Easy Headlight Restoration Tips
  • Replace Water outlet on Audi 80 B2 - free video tips
    TOP 5 mistakes during DIY oil change | AUTODOC tips

Professional manuals for the most common AUDI models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
AUDI 80 (81, 85, B2) Coolant Flange replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME