Disclaimer
How to change brake drum on AUDI 50 (86) – replacement guide
downloads:
1
Views:
15
Recommended replacement interval for the part category Brake drum : 100000 km
Important!
This replacement procedure can be used for:
AUDI 50 (86) 1.3, AUDI 50 (86) 1.1, AUDI 50 (86) 1.1 … View more
The steps may slightly vary depending on the car design.
AUDI 50 (86) 1.3, AUDI 50 (86) 1.1, AUDI 50 (86) 1.1 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Brake Drum for 50 (86) and other AUDI models
Alternative products

All-purpose cleaning spray
Copper grease
Torque wrench
Drive socket # 30
Wheel impact socket #17
Ratchet wrench
Flat screwdriver
Hammer
Pliers
Crow bar
Rubber mallet
Wheel chock
Replacement: brake drum – AUDI 50 (86). AUTODOC experts recommend:
- Replace the brake drums on AUDI 50 (86) in pair for the rear axle. Disregarding the parts state. It ensures even braking.
- The replacement procedure is identical for the right and left brake drums on the same axle.
- When replacing the brake drums, be sure to also change the brake shoes.
- Please note: all work on the car – AUDI 50 (86) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. AUDI 50 (86) - Step 5
Remove the wheel. - Step 6
Remove the wheel hub nut cap. Use a crowbar. Use a hammer. - Step 7
Remove the cotter pin securing the hub nut. Use a crowbar. Use a flat screwdriver. - Step 8
Unscrew the hub nut. Use a drive socket #30. Use a ratchet wrench. - Step 9
Remove the fastening nut. - Step 10
Remove the brake drum assembled with the wheel hub bearing. - Step 11
Clean the hub bearing mounting seat. Use all-purpose cleaning spray. - Step 12
Install the new brake drum assembled with the wheel hub bearing.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the AUDI 50 (86) model
Popular maintenance tutorials for AUDI 50 (86)
Complete guides for changing the Drum brakes on different AUDI 50 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your AUDI 50 (86)
View more
Kolbenschmidt plastic gauge overview
Top 5 reasons why your car squeals | AUTODOC Tips
TOP 5 mistakes during DIY oil change | AUTODOC tips
Easy Steps to Paint Brake Calipers Without Special Skills or High Costs
Most commonly replaced car parts on AUDI 50
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

























