How to change air filter on VW Polo 5 – replacement guide
downloads:
9
Views:
408
0
Users voted – 0
Recommended replacement interval for the part category Air filter : 12month / 15000km
Important!
This replacement procedure can be used for:
VW Polo Saloon (602, 604, 612, 614) 1.6,
VW Polo Saloon (602, 604, 612, 614) 1.6,
VW Polo Saloon (602, 604, 612, 614) 1.4
…
View more
The steps may slightly vary depending on the car design.
How to change air filter on VW POLO 5 Saloon [TUTORIAL AUTODOC]
All the parts you need to replace – Air Filter for Polo Saloon (602, 604, 612, 614) and other VW models
Replacement: air filter – VW Polo 5. AUTODOC experts recommend:
Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
All work should be done with the engine stopped.
Replacement: air filter – VW Polo 5. Use the following procedure:
Step 1
Open the bonnet.
Step 2
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
Step 3
On the right side, detach the PCV valve hose from the engine cover.
Step 4
Undo the fastening screws of the air filter cover. Use a Phillips screwdriver.
Step 5
Take off the filter lid.
Step 6
Remove the filter element from the filter housing.
Step 7
Cover the air intake hose with a microfibre towel to prevent dust and dirt from getting into the system.
Step 8
Clean the air filter cover and housing.
Replacement: air filter – VW Polo 5. Professionals recommend:
Before cleaning the air filter cover and housing, cover the air duct parts, mass airflow sensor (if available), throttle valve with a clean cloth.
Step 9
Remove the microfibre towel from the air intake hose.
Step 10
Insert a new filter element into the filter housing. Make sure that the filter edge fits tight to the housing.
AUTODOC recommends:
Replacement: air filter – VW Polo 5. Be sure to position the filtering element correctly. Avoid misalignment.Take care to only use quality filters.During installation, make sure to prevent dust and dirt from getting into the air filter housing.
Step 11
Reinstall the air filter cover. Fasten it.
Step 12
Screw in the fastening screws of the air filter cover. Use a Phillips screwdriver.
Step 13
On the right side, attach the PCV valve hose to the engine cover.
Step 14
Remove the fender protection cover.
Step 15
Close the hood.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the VW Polo V Saloon (602, 604, 612, 614) model.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your VW Polo Saloon (602, 604, 612, 614)
View more
Checking the starter without removing it | AUTODOC tips
How to easily repair a punctured tyre | AUTODOC tips
Transform Your Engine Bay: Affordable Valve Cover Restoration with AUTODOC