Disclaimer
How to change air filter on BMW 5 Touring (E61) – replacement guide
downloads:
8
Views:
165
Recommended replacement interval for the part category Air filter : 12 month / 15000 km
Important!
This replacement procedure can be used for:
BMW 5 Touring (E61) 530 d, BMW 5 Touring (E61) 525 d, BMW 5 Touring (E61) 530 d, BMW 5 Touring (E61) 530 xd, BMW 5 Touring (E61) 525 d, BMW 5 Touring (E61) 525 d, BMW 5 Touring (E61) 530 d, BMW 5 Touring (E61) 530xd, BMW 5 Touring (E61) 525 xd, BMW 5 Touring (E61) 525 d xDrive, BMW 5 Touring (E61) 530 d xDrive, BMW 5 Touring (E61) 530 d … View more
The steps may slightly vary depending on the car design.
BMW 5 Touring (E61) 530 d, BMW 5 Touring (E61) 525 d, BMW 5 Touring (E61) 530 d, BMW 5 Touring (E61) 530 xd, BMW 5 Touring (E61) 525 d, BMW 5 Touring (E61) 525 d, BMW 5 Touring (E61) 530 d, BMW 5 Touring (E61) 530xd, BMW 5 Touring (E61) 525 xd, BMW 5 Touring (E61) 525 d xDrive, BMW 5 Touring (E61) 530 d xDrive, BMW 5 Touring (E61) 530 d … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Air Filter for 5 Touring (E61) and other BMW models
Alternative products

Drive socket # 13
HEX bit No.H5
Torx bit T25
Torx bit T40
Ratchet wrench
Phillips screwdriver
Clip removal tool
Water pump pliers
Microfibre towel
Fender cover
Replacement: air filter – BMW 5 Touring (E61). Tip from AUTODOC:
- Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
- All work should be done with the engine stopped.
Replacement: air filter – BMW 5 Touring (E61). Recommended sequence of steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Unscrew the fasteners of the suspension strut mount cover. Use a Phillips screwdriver. Use a clip removal tool. - Step 4
Remove the protective caps out of the shock absorber mounting fastener. - Step 5
Release the cabin filter cover clips. - Step 6
Unscrew the fasteners of the cabin filter housing cover. Use a drive socket #13. Use a ratchet wrench. - Step 7
Unscrew the fasteners of the bottom part of the cabin filter housing. Use Torx T25. Use a ratchet wrench. - Step 8
Remove the cabin filter housing cover.Replacement: air filter – BMW 5 Touring (E61). Tip:Do not apply excessive force when removing the part. Otherwise you may damage it. - Step 9
Release the cabin filter cover clips. - Step 10
Unscrew the fasteners of the cabin filter housing cover. Use a drive socket #13. Use a ratchet wrench. - Step 11
Remove the cabin filter housing cover.AUTODOC recommends:Replacement: air filter – BMW 5 Touring (E61). Be sure to position the filtering element correctly. Avoid misalignment. - Step 12
Detach the connectors from the climate control sensors. - Step 13
Remove the cabin filter housing seal. - Step 14
Unscrew the fasteners of the bottom part of the cabin filter housing. Use a drive socket #13. Use a ratchet wrench. - Step 15
Remove the bottom part of the cabin filter housing. - Step 16
Cover the cabin filter air ducts with a microfibre cloth to keep dirt and dust out. - Step 17
Unscrew the fasteners of the diagonal braces. Use Torx T40. Use a ratchet wrench. - Step 18
Remove the diagonal brace. - Step 19
Unscrew the engine cover fastener. Use HEX No.H5. Use a ratchet wrench. - Step 20
Remove the engine cover.AUTODOC recommends:Replacement: air filter – BMW 5 Touring (E61). To avoid damaging the part when removing it, do not use excessive force. - Step 21
Disconnect the air intake pipe fastening. Use HEX No.H5. Use a ratchet wrench. - Step 22
Disconnect the air intake pipe from the air filter housing. - Step 23
Undo the fastening screws of the air filter cover. Use HEX No.H5. Use a ratchet wrench. - Step 24
Unscrew the fasteners of the back section of the engine cover. Use HEX No.H5. Use a ratchet wrench. - Step 25
Remove the back section of the engine cover. - Step 26
Unscrew the oil filler plug. - Step 27
Remove the oil filler cap. - Step 28
Take off the filter lid. - Step 29
Install the oil filler cap. - Step 30
Remove the filter element from the filter housing. Use water pump pliers. - Step 31
Clean the air filter cover and housing.Replacement: air filter – BMW 5 Touring (E61). Professionals recommend:Before cleaning the air filter cover and housing, cover the air duct parts, mass airflow sensor (if available), throttle valve with a clean cloth. - Step 32
Insert a new filter element into the filter housing. Make sure that the filter edge fits tight to the housing.Replacement: air filter – BMW 5 Touring (E61). Tip from AUTODOC:Check out the correct location of the filter element. Do not skew.BMW 5 Touring (E61) – It's important to only use high-quality filters.During installation, make sure to prevent dust and dirt from getting into the air filter housing. - Step 33
Remove the oil filler cap. - Step 34
Reinstall the air filter cover. Fasten it. - Step 35Install the oil filler cap.Step 36
Tighten the oil filler cap.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the BMW 5 Touring (E61) model
Popular maintenance tutorials for BMW E61
Complete guides for changing the Air filters on different BMW 5 SERIES models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your BMW 5 Touring (E61)
View more
How to get your motorcycle ready for spring
5 Essential Tips for beginner drivers: Avoid Common Mistakes
DIY restoration of an old impact wrench
How to tell if a tie rod is faulty
Most commonly replaced car parts on BMW 5 SERIES
Time to replace parts? Get even better deals in our Shop app.

SCAN ME









































