Replacement: air filter – Audi 80 B4. Tip from AUTODOC:
Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
All work should be done with the engine stopped.
Replacement: air filter – Audi 80 B4. Recommended sequence of steps:
Step 1
Open the hood.
Step 2
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
Step 3
Undo the fastening screws of the air filter cover.Use a Phillips screwdriver.
Step 4
Release the air filter cover clips.
Step 5
Remove the air filter cover.
Step 6
Remove the filter element from the filter housing.
Step 7
Clean the air filter cover and housing.
Replacement: air filter – Audi 80 B4. Professionals recommend:
Before cleaning the air filter cover and housing, cover the air duct parts, mass airflow sensor (if available), throttle valve with a clean cloth.
Step 8
Insert a new filter element into the filter housing.
AUTODOC recommends:
Replacement: air filter – Audi 80 B4. Be sure to position the filtering element correctly. Avoid misalignment.Take care to only use quality filters.During installation, make sure to prevent dust and dirt from getting into the air filter housing.
Step 9
Reinstall the air filter cover. Fasten it.
Step 10
Screw in the fastening screws of the air filter cover.Use a Phillips screwdriver.
Step 11
Press the air filter cover clips into place.
Step 12
Remove the fender protection cover.
Step 13
Close the hood.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the AUDI 80 B4 Saloon (8C2) model.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.