AUTODOC FORUM / Car discussions by make / CITROËN / Replacing key barrel in drivers door.

Back to topics

Replacing key barrel in drivers door.
CITROËN XSARA PICASSO (N68)

  • @user_1904479 Oct 02, 2023
    Member
    Hi. I need to replace the cylinder/barrel in the front drivers door as the key just turns. It’s okay in the passenger side. I stripped out the door panel and got down to the cover over the barrel and clipped off the top and bottom but it seems to be attached somehow at higher up as wriggling it doesn’t work. Any tips. Thanks.
    Reply

    Started

    02.10.23

    Latest reply

    02.10.23

    Replies

    1

    Views

    298

  • @Quity1963 Oct 02, 2023
    Member
    For replacement you need to disassemble the half of the door: remove the trim, remove the window regulator, get to the cylinder from the inside of the door, remove the locking pins from the inside of the door and then replace it with a new one.
    Reply

Only registered users may reply to topics and posts

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Autodoc CLUB app qr-code
Scan

To download the app:

Autodoc CLUB App icon