To remove the front door window regulator:
Install in the reverse order of removal, taking into account the following.
– lower the glass by about two-thirds of its stroke;
– disconnect the ground wire from the storage battery;
– remove the door trim;
– peel off the top and bottom of the dust and moisture protection film that covers the front door window regulator;
– through the holes in the door, unscrew the two bolts securing the glass to the window regulator;
– with your hands lift the glass up to the stop and fix it in this position with adhesive tape;
– lower the window regulator to the lowest position;
– remove the electric motor;
– disconnect the electrical connectors from the power window drive;
– with a drill of the required diameter, drill out the rivets securing the window regulator to the door;
– remove the clamps for fastening the window regulator;
– release the window regulator by moving it inside the door;
– remove the window regulator through the hole in the lower part of the door;
– drill out the rest of the rivets from the window regulator;
– blow through the inner space of the door to remove chips after drilling rivets.