Advice on diagnosing a burnt or bent valve
PEUGEOT 308 I Hatchback (4A_, 4C_)
7 
73 
16.02.24 Back to topics
New Drive Shaft Problem (or not)
PEUGEOT 206 CC (2D)
-
PEUGEOT 206 CC (2D) 2.0 S16@user_949857 Jun 04, 2023MemberHi guys,I had both complete drive shafts replaced in my Peugeot 206 CC. Both driveshafts I bought from GSF car parts, and both were fitted by qualified mechanic. After fitting, I am not happy with one of the CV boots rubbers overlapping the metal clips. It does not touch it, however it is extremely close and I think this might cause damage in the future. Please see pictures attached. What do you guys think ? It came out like this from factory, it was not touched.
Reply 04.06.23 
06.06.23 - @Rojectime Jun 06, 2023MemberPerhaps a little bigger boot was installed from the factory, but I don’t see any problem on the photo. the boot does not touch the iron clamp, so nothing will happen to the boot.Reply
Only registered users may reply to topics and posts
Other PEUGEOT topics that might interest you
Section Subsection Views Activity
7 73 16.02.24 Camshaft & Crankshaft correlation.
PEUGEOT 5008 (0U_, 0E_)
5 1057 23.08.21 Bizarre fault ….
PEUGEOT 207 CC (WD_)
4 639 25.12.21 Replacing the oil filter gaskets
PEUGEOT 407 SW (6E_)
3 506 24.09.20 3008 licence plate light fitting replacement
PEUGEOT 3008 (0U_)
3 631 19.10.20 Over revving
PEUGEOT 207
3 227 25.07.23 Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan To download the app:
- scan the QR code
- download from App Store
- download from Google Play
