Front fog lights replacing CITROËN BERLINGO Platform/Chassis (B9)

To replace the fog light on a Citroën Berlingo Platform/Chassis (B9), here is a concise guide based on available resources and common procedures:

- The fog light assembly is typically mounted behind the front bumper. Access often requires partial removal or loosening of the front bumper or the fog light trim panel to reach the fog lamp holder and wiring connector.
- You might need basic tools such as a Torx or 10mm socket wrench to remove screws or clips holding the fog light or bumper parts.
- Once you access the fog light housing, unplug the electrical connector by pulling back the orange locking tab and releasing the retainers.
- Remove any mounting screws or clips securing the fog light assembly.
- Carefully twist and pull the old bulb or the whole fog light assembly out.
- Insert the new bulb or fog light assembly (check that the bulb type is correct, e.g., H11 for many models).
- Reconnect the electrical connector and secure the fog light back in place.
- Reassemble the bumper or trim components.

Additional tips:
- The fog light bulbs for Berlingo B9 are often H11 type but verify your specific model.
- If your Berlingo was not factory equipped with fog lights, there may be wiring harness components pre-installed behind the bumper to support easy retrofitting.
- For detailed step-by-step illustrated manuals and parts, Autodoc Club offers guides on fog light bulb replacement for your model.