Avansi Faulty ECU TOYOTA Avensis II Saloon (T25) (04.2003 - 11.2008)

Describe more precisely what happens when you try to raise the engine speed? If possible, add a video here.

Inspect the wiring between the ECU and the OBD port. If there's a broken wire or poor connection, the ECU might not be able to communicate. Focus especially on pins 6 and 14 for CAN communication if the system is CAN-based.
Ensure the new ECU you purchased is compatible with your 2005 Toyota Avensis backrooms game. Many ECUs are coded specifically to match the vehicle's immobilizer, and using an incompatible ECU may prevent proper functioning.

Ensure that the OBD port is receiving power. You can do this with a multimeter. If there’s no power, the issue might be with the vehicle’s fuse or wiring. Look for any damaged wiring or loose connections, especially around the ECU and OBD port. Corrosion or breaks in the wiring can prevent communication.When looking for a replacement snow rider 3d ECU, ensure it’s compatible with your specific model. Check part numbers and consult with a dealer or a specialized shop.

It sounds like you have a challenging situation with your ECU and OBD port. Have you tried checking the wiring and connections to ensure everything is properly connected? It might also be helpful to consult cookie clicker 2 with a professional mechanic or technician who has experience with ECU issues. Good luck!

Examine the cabling that connects the OBD port to the ECU. The ECU may not be able to communicate if there is a damaged wire or a bad connection. If the system is CAN-based, pay close attention bitlife online to pins 6 and 14 for CAN communication.
Make sure your 2005 Toyota Avensis is compatible with the new ECU you bought.

Have you checked the wiring and connectors to the OBD port? Sometimes, a faulty connection can prevent communication. Also, make sure the replacement ECU matches the original specifications. By the way, have you heard of the rice purity? It's a fun way to gauge your experiences! Good luck!

You are having problems with your Toyota Avensis 2.0, when the car starts but cannot accelerate and the ECU cannot connect to the OBD port for error scanning. First, check the wiring system and OBD port to make sure there are no broken wires or loose connections, retro bowl college and check the relevant fuses. If no problem is found, you can try resetting the ECU by disconnecting the battery for about 10-15 minutes, then reconnecting and starting the car. If it still does not work, you should take the car to a repair center for further inspection

You seem to be in a difficult scenario with your OBD port and ECU. Have you attempted to make sure everything is connected correctly by inspecting the wiring and connections? Consulting with a qualified mechanic or technician who has knowledge of ECU problems could also be beneficial.