
Disclaimer
How to change wheel cylinder on VAUXHALL Cavalier Mk II CC (J82) – replacement guide
downloads:
1
Views:
7

Recommended replacement interval for the part category Wheel Brake Cylinder : 60000 km
Important!
This replacement procedure can be used for:
VAUXHALL Cavalier Mk II CC (J82) 2.0 SRi 130 … View more
The steps may slightly vary depending on the car design.
VAUXHALL Cavalier Mk II CC (J82) 2.0 SRi 130 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wheel Cylinder for Cavalier Mk II CC (J82) and other VAUXHALL models
Wheel Brake Cylinder
Alternative products

Wire brush
WD-40 spray
Copper grease
Drive socket # 10
Combination spanner #9
Combination spanner #24
Flare Nut Wrench № 10
Wheel impact socket #17
Ratchet wrench
Torque wrench
Round-nose pliers
Rubber mallet
Flat Screwdriver
Crow bar
Wheel chock
Replacement: wheel cylinder – VAUXHALL CAVALIER Mk II Hatchback. AUTODOC experts recommend:
- Replace the wheel brake cylinders of the rear drum brakes in pairs.
- The replacement procedure is identical for the right and left wheel brake cylinders of the rear drum brakes.
- All work should be done with the engine stopped.
Replacement: wheel cylinder – VAUXHALL CAVALIER Mk II Hatchback. Recommended sequence of steps:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the rear of the car and secure on supports.Step 4Unscrew the wheel bolts.Replacement: wheel cylinder – VAUXHALL CAVALIER Mk II Hatchback. Tip from AUTODOC:To avoid injury, hold up the wheel when unscrewing the bolts.
- Step 5Remove the wheel.
- Step 6Remove the hub bearing protection cap. Use a flat screwdriver.
- Step 7Remove the cotter pin securing the hub nut. Use round-nose pliers.
- Step 8Unscrew the wheel hub axle nut. Use a combination spanner #24.
- Step 9Remove the brake drum.Replacement: wheel cylinder – VAUXHALL CAVALIER Mk II Hatchback. Professionals recommend:Examine the brake drum. Replace it if necessary.
- Step 10Unscrew the fastener connecting the brake pipe to the wheel cylinder. Use a flare nut spanner #10.Step 11Detach the brake pipe.Replacement: wheel cylinder – VAUXHALL CAVALIER Mk II Hatchback. AUTODOC recommends:Immediately plug the brake line open end to prevent fluid leakage and ingress of dirt into the hydraulic system.
- Step 12Unscrew the wheel cylinder fastener. Use a drive socket #10. Use a ratchet wrench.
- Step 13Remove the brake cylinder from the backplate. Use a crowbar.
- Step 14Clean the brake drum. Use a wire brush. Use WD-40 spray.Step 15Clean the brake pipe attachment spot and the brake drum fastening bolts on :maker :model.
- Step 16Install a new brake cylinder.
- Step 17Tighten the wheel cylinder fastener. Use a drive socket #10. Use a torque wrench. Tighten it to 10 nm torque.
- Step 18Attach the brake pipe. Use a flare nut spanner #10.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VAUXHALL Cavalier Mk2 CC (J82) model
Popular maintenance tutorials for VAUXHALL CAVALIER Mk II Hatchback
Complete guides for changing the Brake wheel cylinder on different VAUXHALL CAVALIER models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VAUXHALL Cavalier Mk II CC (J82)
View more
- How to remove scratches from car plastic | AUTODOC tips
- How to prevent car windows from fogging up | AUTODOC tips
- DIY car soundproofing | AUTODOC tips
- TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
Most commonly replaced car parts on VAUXHALL CAVALIER
Time to replace parts? Get even better deals in our Shop app.

SCAN ME