Important!
This replacement procedure can be used for:
SEAT LEON ST Box Body / Estate (5F8) 1.0 TSI, SEAT LEON ST Box Body / Estate (5F8) 1.2 TSI, SEAT LEON ST Box Body / Estate (5F8) 1.2 TSI, SEAT LEON ST Box Body / Estate (5F8) 1.4 TSI, SEAT LEON ST Box Body / Estate (5F8) 1.8 TFSI, SEAT LEON ST Box Body / Estate (5F8) 2.0 Cupra, SEAT LEON ST Box Body / Estate (5F8) 2.0 Cupra, SEAT LEON ST Box Body / Estate (5F8) 2.0 Cupra 4Drive, SEAT LEON ST Box Body / Estate (5F8) 1.6 TDI, SEAT LEON ST Box Body / Estate (5F8) 1.6 TDI, SEAT LEON ST Box Body / Estate (5F8) 2.0 TDI, SEAT LEON ST Box Body / Estate (5F8) 2.0 TDI 4Drive, SEAT LEON ST Box Body / Estate (5F8) 2.0 TDI, SEAT LEON ST Box Body / Estate (5F8) 2.0 TDI 4Drive View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Track Rod End for LEON ST Box Body / Estate (5F8) and other SEAT models
Tools
Replacement: track rod end – SEAT LEON ST Box Body / Estate (5F8). Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #22
Combination spanner #24
Drive socket # 18
Wheel impact socket #17
Ratchet wrench
Torque wrench
Tap wrench
Vernier caliper
Ball joint puller
Wheel chock
Replacement: track rod end – SEAT LEON ST Box Body / Estate (5F8). Tip from AUTODOC experts:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • All work should be done with the engine stopped.
Replacement: track rod end – SEAT LEON ST Box Body / Estate (5F8). Recommended sequence of steps:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Track Rod End on Seat Leon 3 ST 2013 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    How to replace SEAT LEON ST Box Body / Estate (5F8) 2.0 TDI 2014 Track Rod End - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    Replacement: track rod end – SEAT LEON ST Box Body / Estate (5F8). Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  3. Step 5
    Seat Leon 3 ST 1.6 TDI 2015 Track Rod End replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Track Rod End on SEAT LEON ST Box Body / Estate (5F8) 1.8 TFSI 2016 by yourself
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove SEAT LEON 2.0 Cupra 2017 Track Rod End - online easy-to-follow instructions
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  6. Step 8
    How to replace Track Rod End on SEAT LEON ST Box Body / Estate (5F8) 2018: download PDF manuals and video instructions
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #24.
  7. Step 9
    How hard is it to do yourself: Track Rod End replacement on Seat Leon 3 ST 1.2 TSI 2019 - download illustrated guide
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #18. Use a tap wrench.
  8. Step 10
    Need to know how to renew Track Rod End on SEAT LEON 2020? This free workshop manual will help you to do it yourself
    Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.
  9. Step 11
    Changing of Track Rod End on Seat Leon 3 ST 2021 won't be an issue if you follow this illustrated step-by-step guide
    Screw the end out of the tie rod.
  10. Step 12
    SEAT LEON 1.6 TDI Track Rod End replacement: online guides and video tutorials
    Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
  11. Step 13
    Replacing Track Rod End on Seat Leon 3 ST 2023 2.0 TDI by yourself
    Screw on a new tie rod end.
    AUTODOC recommends:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
  12. Step 14
    LEON ST Box Body / Estate (5F8) 2.0 Cupra 2024 Track Rod End DIY replacement workshop manual
    Connect the tie rod end to the steering knuckle.
  13. Step 15
    How to change Track Rod End on SEAT LEON ST Box Body / Estate (5F8) 2013 - tips and tricks
    Screw on the fastening nut that connects the tie rod end to the steering knuckle. Use a drive socket #18. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the SEAT Leon ST Box Body / Estate (5F8) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
SEAT LEON ST Box Body / Estate (5F8) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY SEAT LEON ST Box Body / Estate (5F8) Track Rod End replacement - online guide
Tips & tricks for your SEAT LEON ST Box Body / Estate (5F8)
View more
  • How to change Tie rod end on SEAT LEON ST Box Body / Estate (5F8) 1.4 TSI - replacement tricks
    Replacing your engine cooling fan | AUTODOC tips
  • Changing Outer tie rod Seat Leon 3 ST 2.0 TDI - Replacement Tips
    What to check when buying a used car | AUTODOC tips
  • Maintenance Hacks - SEAT LEON ST Box Body / Estate (5F8) 1.6 TDI Track rod end ball joint replacement guide
    How to reduce fuel consumption | AUTODOC
  • Replace Outer tie rod end on Seat Leon 3 ST - free video tips
    5 car interior cleaning mistakes | AUTODOC tips