When to replace the Poly V-Belt on your VW POLO
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
VW POLO (AW1, BZ1) 1.0, VW POLO (AW1, BZ1) 1.0, VW POLO (AW1, BZ1) 1.0 MPi View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for POLO (AW1, BZ1) and other VW models
How to change Serpentine belt on Polo 6 1.0 TSI – step-by-step instructions for straightforward car repair Serpentine belt
How to change V-Ribbed Belt Set on Polo 6 1.0 TSI – step-by-step instructions for straightforward car repair V-Ribbed Belt Set
Tools
Replacement: serpentine belt – VW POLO (AW1, BZ1). List of the tools you'll need:
Combination spanner #16
Fender cover
Replacement: serpentine belt – VW POLO (AW1, BZ1). AUTODOC experts recommend:
  • All work should be done with the engine stopped.
Replacement: serpentine belt – VW POLO (AW1, BZ1). Use the following procedure:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Poly V-Belt on Polo 6 2017 - free PDF and video manuals
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
  2. Step 5
    How to replace VW POLO (AW1, BZ1) 1.0 TSI 2018 Poly V-Belt - step-by-step manuals and video guides
    Remove the V-ribbed belt.
  3. Step 6
    Polo 6 2.0 GTI 2019 Poly V-Belt replacement: free workshop manuals
    Return the tensioner pulley to its initial position.
    Replacement: serpentine belt – VW POLO (AW1, BZ1). Tip:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
  4. Step 7
    Changing Poly V-Belt on VW POLO (AW1, BZ1) 1.0 2020 by yourself
    Install the V-ribbed belt.
    Replacement: serpentine belt – VW POLO (AW1, BZ1). AUTODOC recommends:
    Make sure that the V-ribbed belt fits all pulleys snugly.
  5. Step 8
    How to remove VW POLO 1.0 (CHYB) 2021 Poly V-Belt - online easy-to-follow instructions
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VW POLO (AW1, BZ1) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VW POLO (AW1, BZ1) Poly V-Belt replacement - online guide
Tips & tricks for your VW POLO (AW1, BZ1)
View more
  • How to change Alternator belt on VW POLO (AW1, BZ1) 1.6 TDI - replacement tricks
    How to replace the suspension on a BMW E30 Turbo | SUPERCAR AUTODOC
  • Changing Auxiliary belt Polo 6 1.0 TSI - Replacement Tips
    Petrol or diesel? What's the difference between these engines? | AUTODOC
  • Maintenance Hacks - VW POLO (AW1, BZ1) 2.0 GTI Poly V-belt replacement guide
    How to clean an engine bay | AUTODOC
  • Replace Drive belt on Polo 6 - free video tips
    What to do if the TPMS light is on | AUTODOC tips