When to replace the Poly V-Belt on your VW CADDY
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
VW CADDY ALLTRACK Variant (SAB) 1.6 TDI, VW CADDY ALLTRACK Variant (SAB) 1.6 TDI, VW CADDY ALLTRACK Variant (SAB) 2.0 TDI, VW CADDY ALLTRACK Variant (SAB) 2.0 TDI 4motion, VW CADDY ALLTRACK Variant (SAB) 2.0 TDI 4motion View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for CADDY ALLTRACK Variant (SAB) and other VW models
Alternative products
How to change Serpentine belt on VW Caddy Alltrack Kombi 2.0 TDI – step-by-step instructions for straightforward car repair Serpentine belt
Tools
Replacement: serpentine belt – VW CADDY ALLTRACK Variant (SAB). List of the tools you'll need:
Torque wrench
Combination spanner #16
Wheel impact socket #17
Fender cover
Wheel chock
Replacement: serpentine belt – VW CADDY ALLTRACK Variant (SAB). AUTODOC experts recommend:
  • All work should be done with the engine stopped.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Secure the wheels with chocks.
    Step 4
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
    Step 5
    Lift the car using a jack or place it over an inspection pit.
    Step 6
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VW CADDY ALLTRACK Variant (SAB)
    Step 7
    Remove the wheel.
    Step 8
    How to change Poly V-Belt on VW Caddy Alltrack Kombi 2015 - free PDF and video manuals
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
  2. Step 9
    How to replace VW CADDY ALLTRACK Variant (SAB) 2.0 TDI 2016 Poly V-Belt - step-by-step manuals and video guides
    Remove the V-ribbed belt.
  3. Step 10
    Return the tensioner pulley to its initial position. Use a combination spanner #16.
    Replacement: serpentine belt – VW CADDY ALLTRACK Variant (SAB). Professionals recommend:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
    Step 11
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
    Step 12
    VW Caddy Alltrack Kombi 1.4 TGI CNG 2017 Poly V-Belt replacement: free workshop manuals
    Install the V-ribbed belt.
    Replacement: serpentine belt – VW CADDY ALLTRACK Variant (SAB). Tip:
    Make sure that the V-ribbed belt fits all pulleys snugly.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the VW Caddy Alltrack IV Kombi (SAB) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY VW CADDY ALLTRACK Variant (SAB) Poly V-Belt replacement - online guide
Tips & tricks for your VW CADDY ALLTRACK Variant (SAB)
View more
  • How to change Alternator belt on VW CADDY ALLTRACK Variant (SAB) 2.0 TDI 4motion - replacement tricks
    Revive Your Tyres: Expert Tips for a Lasting Shine | AUTODOC Guide
  • Changing Auxiliary belt VW Caddy Alltrack Kombi 2.0 TDI - Replacement Tips
    7 signs of faulty fuel injectors | AUTODOC tips
  • Maintenance Hacks - VW CADDY ALLTRACK Variant (SAB) 1.4 TGI CNG Poly V-belt replacement guide
    DIY manual gearbox restoration | Drivetrain restoration – Part 3
  • Replace Drive belt on VW Caddy Alltrack Kombi - free video tips
    How to tighten cylinder head bolts
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
VW CADDY ALLTRACK Variant (SAB) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME