When to replace the Poly V-Belt on your SKODA RAPID
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
SKODA Rapid Saloon (NA2) 1.6 TDI View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for Rapid Saloon (NA2) and other SKODA models
Alternative products
How to change Serpentine belt on Skoda Rapid Saloon 1.6 TDI – step-by-step instructions for straightforward car repair Serpentine belt
Tools
Replacement: serpentine belt – SKODA RAPID (NA2). List of the tools you'll need:
Torque wrench
Combination spanner #16
Wheel impact socket #17
Fender cover
Wheel chock
Replacement: serpentine belt – SKODA RAPID (NA2). AUTODOC experts recommend:
  • All work should be done with the engine stopped.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Secure the wheels with chocks.
    Step 4
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
    Step 5
    Lift the car using a jack or place it over an inspection pit.
    Step 6
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. SKODA RAPID (NA2)
    Step 7
    Remove the wheel.
    Step 8
    How to change Poly V-Belt on Skoda Rapid Saloon 2011 - free PDF and video manuals
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
  2. Step 9
    How to replace SKODA Rapid Saloon (NA2) 1.6 TDI 2012 Poly V-Belt - step-by-step manuals and video guides
    Remove the V-ribbed belt.
  3. Step 10
    Return the tensioner pulley to its initial position. Use a combination spanner #16.
    Replacement: serpentine belt – SKODA RAPID (NA2). Professionals recommend:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
    Step 11
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
    Step 12
    Skoda Rapid Saloon 1.6 2013 Poly V-Belt replacement: free workshop manuals
    Install the V-ribbed belt.
    Replacement: serpentine belt – SKODA RAPID (NA2). Tip:
    Make sure that the V-ribbed belt fits all pulleys snugly.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the SKODA Rapid Saloon (NA2) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY SKODA Rapid Saloon (NA2) Poly V-Belt replacement - online guide
Tips & tricks for your SKODA Rapid Saloon (NA2)
View more
  • How to change Alternator belt on SKODA Rapid Saloon (NA2) 1.5 TDI - replacement tricks
    Understanding Car Tools: The Key Differences You Need to Know | AUTODOC tips
  • Changing Auxiliary belt Skoda Rapid Saloon 1.6 TDI - Replacement Tips
    Preventing Engine Failure: Head Gasket Inspection Tutorial | AUTODOC
  • Maintenance Hacks - SKODA Rapid Saloon (NA2) 1.6 Poly V-belt replacement guide
    How to tell if a tie rod is faulty
  • Replace Drive belt on Skoda Rapid Saloon - free video tips
    Don’t Replace, Just Polish! Headlight Restoration with AUTODOC
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
SKODA Rapid Saloon (NA2) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME