When to replace the Poly V-Belt on your SKODA KAMIQ
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
SKODA Kamiq (NW4) 1.6 SRE View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for Kamiq (NW4) and other SKODA models
Alternative products
How to change Serpentine belt on SKODA Kamiq (NW4) 1.0 TSI – step-by-step instructions for straightforward car repair Serpentine belt
Tools
Replacement: serpentine belt – SKODA Kamiq (NW4). List of the tools you'll need:
Combination spanner #16
Fender cover
Replacement: serpentine belt – SKODA Kamiq (NW4). AUTODOC experts recommend:
  • All work should be done with the engine stopped.
Replacement: serpentine belt – SKODA Kamiq (NW4). Use the following procedure:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Poly V-Belt on SKODA Kamiq (NW4) 2019 - free PDF and video manuals
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
  2. Step 5
    How to replace SKODA Kamiq (NW4) 1.0 TSI 2020 Poly V-Belt - step-by-step manuals and video guides
    Remove the V-ribbed belt.
  3. Step 6
    SKODA Kamiq (NW4) 1.6 TDI 2021 Poly V-Belt replacement: free workshop manuals
    Return the tensioner pulley to its initial position.
    Replacement: serpentine belt – SKODA Kamiq (NW4). Tip:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
  4. Step 7
    Changing Poly V-Belt on SKODA Kamiq (NW4) 1.0 TGI CNG 2022 by yourself
    Install the V-ribbed belt.
    Replacement: serpentine belt – SKODA Kamiq (NW4). AUTODOC recommends:
    Make sure that the V-ribbed belt fits all pulleys snugly.
  5. Step 8
    How to remove SKODA KAMIQ 1.6 SRE 2023 Poly V-Belt - online easy-to-follow instructions
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the SKODA Kamiq (NW4) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY SKODA Kamiq (NW4) Poly V-Belt replacement - online guide
Tips & tricks for your SKODA Kamiq (NW4)
View more
  • How to change Alternator belt on SKODA Kamiq (NW4) 1.5 TSI - replacement tricks
    Transform Your Car's Look: 6 Simple Accessories You Need to Try!
  • Changing Auxiliary belt SKODA Kamiq (NW4) 1.0 TSI - Replacement Tips
    How to Order Car Parts Online: Avoid These 5 Common Pitfalls
  • Maintenance Hacks - SKODA Kamiq (NW4) 1.6 TDI Poly V-belt replacement guide
    Top 5 reasons why your car squeals | AUTODOC Tips
  • Replace Drive belt on SKODA Kamiq (NW4) - free video tips
    How to Use Sandblasting Equipment: Step-by-Step Guide | AUTODOC Tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
SKODA Kamiq (NW4) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME