When to replace the Poly V-Belt on your SEAT LEON
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
SEAT Leon ST (5F8) 1.6 SRE, SEAT Leon ST (5F8) 1.2 TSI View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for Leon ST (5F8) and other SEAT models
Alternative products
How to change Serpentine belt on Seat Leon 5f8 2.0 TDI – step-by-step instructions for straightforward car repair Serpentine belt
Tools
Replacement: serpentine belt – SEAT LEON ST (5F8). List of the tools you'll need:
Combination spanner #16
Fender cover
Replacement: serpentine belt – SEAT LEON ST (5F8). AUTODOC experts recommend:
  • All work should be done with the engine stopped.
Replacement: serpentine belt – SEAT LEON ST (5F8). Use the following procedure:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Poly V-Belt on Seat Leon 5f8 2013 - free PDF and video manuals
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
  2. Step 5
    How to replace SEAT Leon ST (5F8) 2.0 TDI 2014 Poly V-Belt - step-by-step manuals and video guides
    Remove the V-ribbed belt.
  3. Step 6
    Seat Leon 5f8 1.6 TDI 2015 Poly V-Belt replacement: free workshop manuals
    Return the tensioner pulley to its initial position.
    Replacement: serpentine belt – SEAT LEON ST (5F8). Tip:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
  4. Step 7
    Changing Poly V-Belt on SEAT Leon ST (5F8) 1.8 TSI 2016 by yourself
    Install the V-ribbed belt.
    Replacement: serpentine belt – SEAT LEON ST (5F8). AUTODOC recommends:
    Make sure that the V-ribbed belt fits all pulleys snugly.
  5. Step 8
    How to remove SEAT LEON 1.4 TGI 2017 Poly V-Belt - online easy-to-follow instructions
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the SEAT Leon III ST (5F8) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY SEAT Leon ST (5F8) Poly V-Belt replacement - online guide
Tips & tricks for your SEAT Leon ST (5F8)
View more
  • How to change Alternator belt on SEAT Leon ST (5F8) 1.4 TSI - replacement tricks
    5 possible reasons why your car heater isn't working
  • Changing Auxiliary belt Seat Leon 5f8 2.0 TDI - Replacement Tips
    5 more brake repair mistakes | Stop making these brake repair mistakes
  • Maintenance Hacks - SEAT Leon ST (5F8) 1.6 TDI Poly V-belt replacement guide
    How to remove rust | AUTODOC tips
  • Replace Drive belt on Seat Leon 5f8 - free video tips
    5 causes of turbocharger failure and how to avoid them
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
SEAT Leon ST (5F8) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME