
Disclaimer
How to change glow plugs on SEAT Leon ST (5F8) – replacement guide
downloads:
5
Views:
133

Recommended replacement interval for the part category Glow plug : 30000 km
Important!
This replacement procedure can be used for:
SEAT Leon ST (5F8) 2.0 TDI, SEAT Leon ST (5F8) 2.0 TDI, SEAT Leon ST (5F8) 2.0 TDI, SEAT Leon ST (5F8) 1.6 TDI, SEAT Leon ST (5F8) 1.6 TDI, SEAT Leon ST (5F8) 2.0 TDI, SEAT Leon ST (5F8) 1.6 TDI, SEAT Leon ST (5F8) 1.6 TDI 4Drive, SEAT Leon ST (5F8) 2.0 TDI 4Drive, SEAT Leon ST (5F8) 1.6 TDI 4Drive, SEAT Leon ST (5F8) 2.0 TDI 4Drive, SEAT Leon ST (5F8) 1.6 TDI, SEAT Leon ST (5F8) 1.6 TDI 4Drive … View more
The steps may slightly vary depending on the car design.
SEAT Leon ST (5F8) 2.0 TDI, SEAT Leon ST (5F8) 2.0 TDI, SEAT Leon ST (5F8) 2.0 TDI, SEAT Leon ST (5F8) 1.6 TDI, SEAT Leon ST (5F8) 1.6 TDI, SEAT Leon ST (5F8) 2.0 TDI, SEAT Leon ST (5F8) 1.6 TDI, SEAT Leon ST (5F8) 1.6 TDI 4Drive, SEAT Leon ST (5F8) 2.0 TDI 4Drive, SEAT Leon ST (5F8) 1.6 TDI 4Drive, SEAT Leon ST (5F8) 2.0 TDI 4Drive, SEAT Leon ST (5F8) 1.6 TDI, SEAT Leon ST (5F8) 1.6 TDI 4Drive … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Glow Plugs for Leon ST (5F8) and other SEAT models
Glow plug
Alternative products

WD-40 spray
Electronic spray
High-temperature ceramic grease
Torque wrench
Spark plug socket # 10
Torx bit T27
Ratchet wrench
Flat screwdriver
Needle nose pliers
Fender cover
Replacement: glow plugs – SEAT LEON ST (5F8). AUTODOC experts recommend:
- The replacement procedure is identical for all glow plugs.
- Wear gloves to protect your hands from hot surfaces.
- Replacement: glow plugs – SEAT LEON ST (5F8). Recommended sequence of steps:
Carry out replacement in the following order:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Before getting down to work, start the engine and let it warm up to operating temperature.Step 4Shut off the engine.Step 5Unscrew the bracket for the engine pipes. Use Torx T27. Use a ratchet wrench.
- Step 6Detach the engine wiring harness. Use a flat screwdriver.
- Step 7Detach the engine wiring harness connectors. Use a flat screwdriver.
- Step 8Detach the glow plug wiring connectors. Use needle nose pliers.
- Step 9Clean dirt, dust and debris from inside the spark plug wells.
- Step 10Treat the glow plugs. Use WD-40 spray.
- Step 11Unscrew the glow plugs. Use the spark plug socket #10. Use a torque wrench.
- Step 12Clean dirt, dust and debris from inside the spark plug wells.
- Step 13Remove the glow plugs. Use the spark plug socket #10. Use needle nose pliers.
- Step 14Treat the glow plugs. Use high-temperature ceramic grease.Please note!Do not touch the heating element as fingerprints may cause malfunction.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the SEAT Leon III ST (5F8) model
Popular maintenance tutorials for Seat Leon 5f8
Complete guides for changing the Glow plug on different SEAT LEON models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your SEAT Leon ST (5F8)
View more
- Coolant comparison test | AUTODOC
- What to do if your check engine light is on | AUTODOC tips
- How to prevent car windows from fogging up | AUTODOC tips
- Regain Your Confidence on the Road: Easy Headlight Restoration Tips
Most commonly replaced car parts on SEAT LEON
Time to replace parts? Get even better deals in our Shop app.

SCAN ME