
Disclaimer
How to change serpentine belt on RENAULT Laguna I Estate (K56) – replacement guide
downloads:
1
Views:
92

Recommended replacement interval for the part category Serpentine belt : 5 year / 120000 km
Important!
This replacement procedure can be used for:
RENAULT LAGUNA I Grandtour (K56_) 2.0 16V (A56A/B), RENAULT LAGUNA I Grandtour (K56_) 1.6 16V (K568), RENAULT LAGUNA I Grandtour (K56_) 1.8 16V (K563, K564) … View more
The steps may slightly vary depending on the car design.
RENAULT LAGUNA I Grandtour (K56_) 2.0 16V (A56A/B), RENAULT LAGUNA I Grandtour (K56_) 1.6 16V (K568), RENAULT LAGUNA I Grandtour (K56_) 1.8 16V (K563, K564) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for LAGUNA I Grandtour (K56_) and other RENAULT models
Serpentine belt
Alternative products

Torque wrench
Combination spanner #13
Drive socket # 18
Wheel impact socket #19
Ratchet wrench
Phillips Screwdriver
Fender cover
Wheel chock
AUTODOC recommends:
- Please note: all work on the car – RENAULT LAGUNA I Grandtour (K56_) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Secure the wheels with chocks. Loosen the wheel mounting bolts. Use wheel impact socket #19.
- Step 4Raise the car.Replacement: serpentine belt – RENAULT LAGUNA I Grandtour (K56_). Tip from AUTODOC:If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.Step 5Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. RENAULT LAGUNA I Grandtour (K56_)
- Step 6Remove the wheel.
- Step 7Unscrew and remove the wheel arch cover fasteners. Use a Phillips screwdriver.
- Step 8Remove the wheel arch cover.
- Step 9Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #13.
- Step 10Remove the V-ribbed belt.Replacement: serpentine belt – RENAULT LAGUNA I Grandtour (K56_). Professionals recommend:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
- Step 11Install the V-ribbed belt.AUTODOC recommends:Make sure that the V-ribbed belt fits all pulleys snugly.
- Step 12Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #13.
- Step 13Place the V-ribbed belt on the tensioner pulley. Return the tensioner pulley to its initial position.
- Step 14Rotate the crankshaft several times to check whether the new V-ribbed belt is working correctly. Use a drive socket #18. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Laguna I Estate (K56) model
Popular maintenance tutorials for Renault Laguna 1 Estate
Complete guides for changing the Alternator belt on different RENAULT LAGUNA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT LAGUNA I Grandtour (K56_)
View more
- Top 5 mistakes when replacing spark plugs | AUTODOC tips
- DIY brake caliper restoration | AUTODOC tips
- Save Money on Fuel with These Easy Tips | AUTODOC
- Can You Hear Your Brakes Squeaking? Learn the Causes and DIY Solutions! | AUTODOC Tips
Most commonly replaced car parts on RENAULT LAGUNA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME