When to replace the Poly V-Belt on your CUPRA LEON
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
CUPRA Leon Sportstourer (KL8) 2.0 TSI 4Drive, CUPRA Leon Sportstourer (KL8) 2.0 TSI, CUPRA Leon Sportstourer (KL8) 2.0 TSI View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for Leon Sportstourer (KL8) and other CUPRA models
Alternative products
How to change Serpentine belt on CUPRA Leon Sportstourer (KL8) e-HYBRID – step-by-step instructions for straightforward car repair Serpentine belt
Tools
Replacement: serpentine belt – CUPRA Leon Sportstourer (KL8). List of the tools you'll need:
Combination spanner #16
Fender cover
Replacement: serpentine belt – CUPRA Leon Sportstourer (KL8). AUTODOC recommends:
  • All work should be done with the engine stopped.
Replacement: serpentine belt – CUPRA Leon Sportstourer (KL8). Recommended sequence of steps:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Poly V-Belt on CUPRA Leon Sportstourer (KL8) 2020 - free PDF and video manuals
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
  2. Step 5
    How to replace CUPRA Leon Sportstourer (KL8) e-HYBRID 2021 Poly V-Belt - step-by-step manuals and video guides
    Remove the V-ribbed belt.
    Replacement: serpentine belt – CUPRA Leon Sportstourer (KL8). Tip:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
  3. Step 6
    CUPRA Leon Sportstourer (KL8) 2.0 TSI 2022 Poly V-Belt replacement: free workshop manuals
    Return the tensioner pulley to its initial position. Use a combination spanner #16.
  4. Step 7
    Changing Poly V-Belt on CUPRA Leon Sportstourer (KL8) 1.4 e-HYBRID 2023 by yourself
    Install the V-ribbed belt.
    Replacement: serpentine belt – CUPRA Leon Sportstourer (KL8). AUTODOC experts recommend:
    Make sure that the V-ribbed belt fits all pulleys snugly.
  5. Step 8
    How to remove CUPRA LEON 1.5 eTSI 2024 Poly V-Belt - online easy-to-follow instructions
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the CUPRA Leon Sportstourer (KL8) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY CUPRA Leon Sportstourer (KL8) Poly V-Belt replacement - online guide
Tips & tricks for your CUPRA Leon Sportstourer (KL8)
View more
  • How to change Alternator belt on CUPRA Leon Sportstourer (KL8) 2.0 TSI 4Drive - replacement tricks
    How to make an injector test bench yourself
  • Changing Auxiliary belt CUPRA Leon Sportstourer (KL8) e-HYBRID - Replacement Tips
    2 ways to clean the EGR valve – which one is better?
  • Maintenance Hacks - CUPRA Leon Sportstourer (KL8) 2.0 TSI Poly V-belt replacement guide
    Fuse Replacement Made Simple: Step-by-Step Guide | AUTODOC
  • Replace Drive belt on CUPRA Leon Sportstourer (KL8) - free video tips
    Top 5 Mistakes to Avoid for Safe Engine Bay Repairs | AUTODOC Tips

Professional manuals for the most common CUPRA models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
CUPRA Leon Sportstourer (KL8) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME