Disclaimer
How to change rear wheel bearing on RENAULT LOGAN I (LS_) – replacement guide
downloads:
0
Views:
4
Important!
This replacement procedure can be used for:
RENAULT LOGAN I (LS_) 1.6 (LS0L, LS09, LS0V, LS0P, LS18, LS1S, LS1V, LS1Y,..., RENAULT LOGAN I (LS_) 1.5 dCi, RENAULT LOGAN I (LS_) 1.6, RENAULT LOGAN I (LS_) 1.4 … View more
The steps may slightly vary depending on the car design.
RENAULT LOGAN I (LS_) 1.6 (LS0L, LS09, LS0V, LS0P, LS18, LS1S, LS1V, LS1Y,..., RENAULT LOGAN I (LS_) 1.5 dCi, RENAULT LOGAN I (LS_) 1.6, RENAULT LOGAN I (LS_) 1.4 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wheel Bearing for LOGAN I (LS_) and other RENAULT models
Alternative products

Wire brush
WD-40 spray
All-purpose cleaning spray
Copper grease
Drive socket # 30
Wheel impact socket #19
Rubber mallet
Tap wrench
Hammer
Crow bar
Wheel chock
Replacement: wheel bearing – RENAULT LOGAN I (LS_). AUTODOC experts recommend:
- Do not re-use the bearing assembly of your RENAULT LOGAN I (LS_) car.
- The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
- Please note: all work on the car – RENAULT LOGAN I (LS_) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. RENAULT LOGAN I (LS_) - Step 5
Remove the wheel. - Step 6
Clean the brake drum. Use a wire brush. Use WD-40 spray. - Step 7
Remove the hub bearing protection cap. Use a hammer. Use a crowbar.Replacement: wheel bearing – RENAULT LOGAN I (LS_). Professionals recommend:Some cars are not equipped with wheel hub caps. - Step 8
Unscrew the wheel hub axle nut. Use a drive socket #30. Use a tap wrench. - Step 9
Remove the brake drum assembled with the wheel hub bearing. - Step 10
Clean the hub bearing mounting seat. Use all-purpose cleaning spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Logan I Saloon model
Popular maintenance tutorials for RENAULT LOGAN I (LS_)
Complete guides for changing the Wheel bearings on different RENAULT LOGAN models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT LOGAN I (LS_)
View more
Top 5 possible reasons your car is shaking or vibrating
How to Prevent Premature Wear on Your Car Boot Damper | AUTODOC
5 possible reasons why your car heater isn't working
DIY engine block coffee table
Most commonly replaced car parts on RENAULT LOGAN
Time to replace parts? Get even better deals in our Shop app.

SCAN ME



























