Important!
This replacement procedure can be used for:
MERCEDES-BENZ C-Class Saloon (W204) C 63 AMG DR 520 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Wheel Bearing for C-Class Saloon (W204) and other MERCEDES-BENZ models
How to change Wheel bearing kit on W204 C 220 CDI 2.2 (204.008) – step-by-step instructions for straightforward car repair Wheel bearing kit
How to change Wheel bearing on W204 C 220 CDI 2.2 (204.008) – step-by-step instructions for straightforward car repair Wheel bearing
Tools
Replacement: wheel bearing – MERCEDES-BENZ C-CLASS (W204). List of the tools you'll need:
Wire brush
All-purpose cleaning spray
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #16
Combination spanner #18
Combination spanner #21
Drive socket # 8
Drive socket # E12
Drive socket # 16
Drive socket # 18
Drive socket # E18
Drive socket # 32
HEX bit no.H10.
Torx bit M12
Torx bit T30
Wheel impact socket #17
Ratchet wrench
Torque wrench
Hammer
Flat chisel
Pin punch
Pliers
Round-nose pliers
Flat Screwdriver
Bush and bearing driver set
Crow bar
Hydraulic transmission jack
Wheel chock
Replacement: wheel bearing – MERCEDES-BENZ C-CLASS (W204). AUTODOC experts recommend:
  • Do not re-use the bearing assembly of your MERCEDES-BENZ C-CLASS (W204) car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • All work should be done with the engine stopped.
Replacement: wheel bearing – MERCEDES-BENZ C-CLASS (W204). Use the following procedure:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
    Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    How to change Wheel Bearing on W204 2007 - free PDF and video manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. MERCEDES-BENZ C-CLASS (W204)
  2. Step 5
    How to replace MERCEDES-BENZ C-Class Saloon (W204) C 220 CDI 2.2 (204.008) 2008 Wheel Bearing - step-by-step manuals and video guides
    Remove the wheel.
  3. Step 6
    W204 C 200 CDI (204.007, 204.006) 2009 Wheel Bearing replacement: free workshop manuals
    Clean the brake caliper bracket fasteners. Use a wire brush. Use WD-40 spray.
  4. Step 7
    Changing Wheel Bearing on MERCEDES-BENZ C-Class Saloon (W204) C 200 CDI (204.001) 2010 by yourself
    Unscrew the caliper bracket fastening. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench.
  5. Step 8
    Remove the fastening bolts (2 pieces).
    Step 9
    How to remove MERCEDES-BENZ C-CLASS C 180 1.8 Kompressor (204.046) 2011 Wheel Bearing - online easy-to-follow instructions
    Remove the brake caliper together with its bracket.
    Replacement: wheel bearing – MERCEDES-BENZ C-CLASS (W204). Tip:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur.Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
  6. Step 10
    How to replace Wheel Bearing on MERCEDES-BENZ C-Class Saloon (W204) 2012: download PDF manuals and video instructions
    Clean the brake disc fasteners. Use a wire brush. Use WD-40 spray.
  7. Step 11
    How hard is it to do yourself: Wheel Bearing replacement on W204 C 200 1.8 Kompressor (204.041) 2013 - download illustrated guide
    Unscrew the brake disc fastening. Use Torx T30. Use a ratchet wrench.
  8. Step 12
    Need to know how to renew Wheel Bearing on MERCEDES-BENZ C-CLASS 2014? This free workshop manual will help you to do it yourself
    Remove the brake disc.
  9. Step 13
    Changing of Wheel Bearing on W204 2007 won't be an issue if you follow this illustrated step-by-step guide
    Unstake the wheel hub retaining nut. Use a flat metal-working chisel. Use a hammer.
  10. Step 14
    MERCEDES-BENZ C-CLASS C 180 CGI 1.8 (204.049) Wheel Bearing replacement: online guides and video tutorials
    Unscrew the wheel hub axle nut. Use a drive socket #32. Use a ratchet wrench.
  11. Step 15
    Remove the fastening nut.
    Step 16
    Replacing Wheel Bearing on W204 2009 C 220 CDI 2.2 (204.008) by yourself
    Remove the brake shoe adjuster. Use pliers. Use round-nose pliers. Use a flat screwdriver.
  12. Step 17
    C-Class Saloon (W204) C 180 1.8 Kompressor (204.046) 2010 Wheel Bearing DIY replacement workshop manual
    Dismantle the hand brake shoes together with the lower spring.
  13. Step 18
    How to change Wheel Bearing on MERCEDES-BENZ C-Class Saloon (W204) 2011 - tips and tricks
    Disconnect the parking brake cable. Use a flat screwdriver.
  14. Step 19
    Clean the control arm fasteners. Use a wire brush. Use WD-40 spray.
    Step 20
    Step-by-step recommendations for DIY replacement W204 2012 C 180 1.8 Kompressor (204.046) Wheel Bearing
    Unscrew the fastener connecting the control arm to the rear knuckle. Use a combination spanner #18. Use HEX No.H10. Use a ratchet wrench.
  15. Step 21
    Remove the fastening bolt.
    Step 22
    DIY replacement of Wheel Bearing on MERCEDES-BENZ C-Class Saloon (W204) C 220 CDI 2.2 (204.002) 2013 is not an issue anymore with our step-by-step tutorial
    Detach the control arm.
  16. Step 23
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
    Step 24
    How to change Wheel Bearing on W204 2007 - free PDF and video manuals
    Unscrew the stabilizer rod fasteners. Use a combination spanner #16. Use a drive socket #16. Use a ratchet wrench.
  17. Step 25
    How to replace MERCEDES-BENZ C-Class Saloon (W204) C 220 CDI 2.2 (204.008) 2008 Wheel Bearing - step-by-step manuals and video guides
    Remove the fastening bolt.
  18. Step 26
    Remove the stabilizer rod.
    Step 27
    W204 C 200 CDI (204.007, 204.006) 2009 Wheel Bearing replacement: free workshop manuals
    Unscrew the fastener connecting the control arm to the rear knuckle. Use a combination spanner #18. Use Torx M12. Use a ratchet wrench.
  19. Step 28
    Remove the fastening bolt. Use Torx M12. Use a ratchet wrench.
    Step 29
    Changing Wheel Bearing on MERCEDES-BENZ C-Class Saloon (W204) C 200 CDI (204.001) 2010 by yourself
    Unscrew the upper control arm fasteners. Use a combination spanner #18. Use a drive socket #E18. Use a ratchet wrench.
  20. Step 30
    How to remove MERCEDES-BENZ C-CLASS C 180 1.8 Kompressor (204.046) 2011 Wheel Bearing - online easy-to-follow instructions
    Remove the fastening bolt. Use a pin punch. Use a hammer.
  21. Step 31
    Detach the ABS wiring harness bracket.
    Step 32
    How to replace Wheel Bearing on MERCEDES-BENZ C-Class Saloon (W204) 2012: download PDF manuals and video instructions
    Detach the control arm.
  22. Step 33
    How hard is it to do yourself: Wheel Bearing replacement on W204 C 200 1.8 Kompressor (204.041) 2013 - download illustrated guide
    Unscrew the upper control arm fasteners. Use a combination spanner #18. Use a drive socket #E18. Use a ratchet wrench.
  23. Step 34
    Remove the fastening bolt.
    Step 35
    Detach the control arm.
    Step 36
    Need to know how to renew Wheel Bearing on MERCEDES-BENZ C-CLASS 2014? This free workshop manual will help you to do it yourself
    Unscrew the fastener connecting the control arm to the rear knuckle. Use a combination spanner #21. Use HEX No.H10. Use a ratchet wrench.
  24. Step 37
    Detach the control arm.
    Step 38
    Changing of Wheel Bearing on W204 2007 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the ABS sensor fastening from the steering knuckle. Use a drive socket #8. Use a ratchet wrench.
  25. Step 39
    MERCEDES-BENZ C-CLASS C 180 CGI 1.8 (204.049) Wheel Bearing replacement: online guides and video tutorials
    Disconnect the ABS sensor.
  26. Step 40
    Remove the fastening bolt. Use a pin punch. Use a hammer.
    Step 41
    Replacing Wheel Bearing on W204 2009 C 220 CDI 2.2 (204.008) by yourself
    Detach the driveshaft from the steering knuckle.
    Replacement: wheel bearing – MERCEDES-BENZ C-CLASS (W204). AUTODOC recommends:
    Make sure that the drive shaft is not unloaded (when the car is jacked).
  27. Step 42
    Remove the steering knuckle together with the hub.
    Step 43
    C-Class Saloon (W204) C 180 1.8 Kompressor (204.046) 2010 Wheel Bearing DIY replacement workshop manual
    Remove the wheel hub from the steering knuckle. Use a bush and bearing driver set. Use a hammer.
  28. Step 44
    How to change Wheel Bearing on MERCEDES-BENZ C-Class Saloon (W204) 2011 - tips and tricks
    Unscrew the hub bearing mounting. Use a drive socket #E12. Use a ratchet wrench.
  29. Step 45
    Step-by-step recommendations for DIY replacement W204 2012 C 180 1.8 Kompressor (204.046) Wheel Bearing
    Remove the hub bearing mounting. Use a hammer.
  30. Step 46
    Clean the hub bearing mounting seat. Use a wire brush. Use WD-40 spray.
    Step 47
    DIY replacement of Wheel Bearing on MERCEDES-BENZ C-Class Saloon (W204) C 220 CDI 2.2 (204.002) 2013 is not an issue anymore with our step-by-step tutorial
    Install a new hub bearing and secure it.
  31. Step 48
    How to change Wheel Bearing on W204 2007 - free PDF and video manuals
    Tighten the fastener of the wheel hub bearing. Use a drive socket #E12. Use a torque wrench. Tighten it to 80 Nm torque.
  32. Step 49
    Treat the fasteners of the wheel hub bearing. Use copper grease.
    Step 50
    How to replace MERCEDES-BENZ C-Class Saloon (W204) C 220 CDI 2.2 (204.008) 2008 Wheel Bearing - step-by-step manuals and video guides
    Install the wheel hub on the steering knuckle. Use a bush and bearing driver set.
  33. Step 51
    W204 C 200 CDI (204.007, 204.006) 2009 Wheel Bearing replacement: free workshop manuals
    Clean the splines of the drive shaft CV joint. Use a wire brush. Use WD-40 spray.
  34. Step 52
    Changing Wheel Bearing on MERCEDES-BENZ C-Class Saloon (W204) C 200 CDI (204.001) 2010 by yourself
    Install the steering knuckle with a hub in assembly.
  35. Step 53
    Mount the drive shaft into the wheel hub.
    Step 54
    How to remove MERCEDES-BENZ C-CLASS C 180 1.8 Kompressor (204.046) 2011 Wheel Bearing - online easy-to-follow instructions
    Install the fastening bolt. Use a hammer.
  36. Step 55
    How to replace Wheel Bearing on MERCEDES-BENZ C-Class Saloon (W204) 2012: download PDF manuals and video instructions
    Attach the control arm.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
MERCEDES-BENZ C-Class Saloon (W204) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY MERCEDES-BENZ C-Class Saloon (W204) Wheel Bearing replacement - online guide
Tips & tricks for your MERCEDES-BENZ C-Class Saloon (W204)
View more
  • How to change Wheel bearings on MERCEDES-BENZ C-Class Saloon (W204) C 220 CDI 2.2 (204.002) - replacement tricks
    Checking the starter without removing it | AUTODOC tips
  • Changing Hub bearing W204 C 220 CDI 2.2 (204.008) - Replacement Tips
    How to check your head gasket | AUTODOC
  • Maintenance Hacks - MERCEDES-BENZ C-Class Saloon (W204) C 200 CDI (204.007, 204.006) Wheel bearing kit replacement guide
    How to wash your car in winter | AUTODOC tips
  • Replace Wheel hub bearing on W204 - free video tips
    What to do if the TPMS light is on | AUTODOC tips