Important!
This replacement procedure can be used for:
CITROËN DS3 Convertible 1.2 VTi 82, CITROËN DS3 Convertible 1.6 VTi 120, CITROËN DS3 Convertible 1.6 THP 155, CITROËN DS3 Convertible 1.6 HDi 90, CITROËN DS3 Convertible 1.6 THP 150, CITROËN DS3 Convertible 1.6 BlueHDi 120, CITROËN DS3 Convertible 1.6 BlueHDi 100, CITROËN DS3 Convertible 1.2 THP 110, CITROËN DS3 Convertible 1.6 Racing, CITROËN DS3 Convertible 1.6 THP 165, CITROËN DS3 Convertible 1.6 BlueHDi 115, CITROËN DS3 Convertible 1.6 Racing, CITROËN DS3 Convertible 1.6 THP 165, CITROËN DS3 Convertible 1.6 BlueHDi 100 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Wheel Bearing for DS3 Convertible and other CITROËN models
Tools
Replacement: wheel bearing – CITROËN DS3 Convertible. List of the tools you'll need:
Wire brush
Nylon cleaning brush
WD-40 spray
All-purpose cleaning spray
Brake cleaner
Multipurpose grease
Copper grease
Torque wrench
Combination spanner #19
Drive socket # 13
Drive socket # 36
Torx bit T55
Wheel impact socket #17
Brake caliper wind back tool
Ratchet wrench
Tap wrench
Hammer
Flat chisel
Rubber mallet
Flat Screwdriver
Crow bar
Hub slide hammer puller
Wheel chock
Replacement: wheel bearing – CITROËN DS3 Convertible. AUTODOC recommends:
  • Do not re-use the bearing assembly of your PEUGEOT 207 car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • All work should be done with the engine stopped.
Replacement: wheel bearing – CITROËN DS3 Convertible. Recommended sequence of steps:
  1. Step 1
    Open the bonnet. Unscrew the brake fluid reservoir cap.
    Step 2
    Secure the wheels with chocks.
    Step 3
    How to change Wheel Bearing on Citroen DS3 Convertible 2013 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 4
    Raise the rear of the car and secure on supports.
    Step 5
    How to replace CITROËN DS3 Convertible 1.6 HDi 90 2014 Wheel Bearing - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. CITROËN DS3 Convertible
  3. Step 6
    Citroen DS3 Convertible 1.6 VTi 120 2015 Wheel Bearing replacement: free workshop manuals
    Remove the wheel.
  4. Step 7
    Changing Wheel Bearing on CITROËN DS3 Convertible 1.6 THP 155 2013 by yourself
    Clean the brake caliper fasteners. Use a wire brush. Use all-purpose cleaning spray.
  5. Step 8
    How to remove CITROËN DS3 1.2 THP 110 2014 Wheel Bearing - online easy-to-follow instructions
    Unscrew the brake caliper fastening. Use a combination spanner #19. Use a drive socket #13. Use a ratchet wrench.
  6. Step 9
    Spread the brake pads. Use a crowbar.
    Step 10
    How to replace Wheel Bearing on CITROËN DS3 Convertible 2015: download PDF manuals and video instructions
    Remove the brake caliper.
    Replacement: wheel bearing – CITROËN DS3 Convertible. Tip from AUTODOC experts:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
  7. Step 11
    How hard is it to do yourself: Wheel Bearing replacement on Citroen DS3 Convertible 1.6 THP 165 2013 - download illustrated guide
    Remove the brake pads. Use a crowbar.
  8. Step 12
    Need to know how to renew Wheel Bearing on CITROËN DS3 2014? This free workshop manual will help you to do it yourself
    Clean the brake caliper bracket fasteners. Use a wire brush. Use WD-40 spray.
  9. Step 13
    Changing of Wheel Bearing on Citroen DS3 Convertible 2015 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the caliper bracket fastening. Use Torx T55. Use a tap wrench.
  10. Step 14
    CITROËN DS3 1.6 Racing Wheel Bearing replacement: online guides and video tutorials
    Remove the caliper bracket.
  11. Step 15
    Replacing Wheel Bearing on Citroen DS3 Convertible 2014 1.6 HDi 90 by yourself
    Clean the brake disc fasteners. Use a wire brush. Use WD-40 spray.
  12. Step 16
    DS3 Convertible 1.2 THP 110 2015 Wheel Bearing DIY replacement workshop manual
    Remove the wheel hub nut cap. Use a crowbar. Use a rubber mallet.
    Replacement: wheel bearing – CITROËN DS3 Convertible. Tip from AUTODOC:
    In some cars, the wheel hub nut is not protected with a cap.
  13. Step 17
    How to change Wheel Bearing on CITROËN DS3 Convertible 2013 - tips and tricks
    Unstake the wheel hub retaining nut. Use a flat metal-working chisel. Use a hammer.
  14. Step 18
    Step-by-step recommendations for DIY replacement Citroen DS3 Convertible 2014 1.2 THP 110 Wheel Bearing
    Unscrew the hub nut. Use a drive socket #36. Use a tap wrench.
  15. Step 19
    DIY replacement of Wheel Bearing on CITROËN DS3 Convertible 1.2 VTi 82 2015 is not an issue anymore with our step-by-step tutorial
    Remove the brake disc assemled with the wheel hub bearing. Use the hub slide hammer puller.
  16. Step 20
    How to change Wheel Bearing on Citroen DS3 Convertible 2013 - free PDF and video manuals
    Clean the stub axle. Use a wire brush. Use all-purpose cleaning spray.
  17. Step 21
    How to replace CITROËN DS3 Convertible 1.6 HDi 90 2014 Wheel Bearing - step-by-step manuals and video guides
    Treat the stub axle. Use a multipurpose grease. Use a flat screwdriver.
  18. Step 22
    Citroen DS3 Convertible 1.6 VTi 120 2015 Wheel Bearing replacement: free workshop manuals
    Clean the brake caliper bracket from dirt and dust. Use a wire brush. Use a brake cleaner.
    AUTODOC recommends:
    Replacement: wheel bearing – CITROËN DS3 Convertible. After applying the spray, wait a few minutes.
  19. Step 23
    Changing Wheel Bearing on CITROËN DS3 Convertible 1.6 THP 155 2013 by yourself
    Install the brake disc assembled with the wheel hub bearing.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the CITROËN DS3 Convertible model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
CITROËN DS3 Convertible Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY CITROËN DS3 Convertible Wheel Bearing replacement - online guide
Tips & tricks for your CITROËN DS3 Convertible
View more
  • How to change Wheel bearings on CITROËN DS3 Convertible 1.2 VTi 82 - replacement tricks
    Petrol or diesel? What's the difference between these engines? | AUTODOC
  • Changing Hub bearing Citroen DS3 Convertible 1.6 HDi 90 - Replacement Tips
    What to do if the airbag light is on | AUTODOC tips
  • Maintenance Hacks - CITROËN DS3 Convertible 1.6 VTi 120 Wheel bearing kit replacement guide
    How to polish your car | AUTODOC tips
  • Replace Wheel hub bearing on Citroen DS3 Convertible - free video tips
    What to do if the ABS light comes on | AUTODOC tips