Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
Step 11
Remove the brake pads. Use a crowbar.
Replacement: brake pads – Skoda Octavia 1Z5. Tip:
Measure the brake disc thickness. Upon reaching the wear limit the part must be replaced.
Step 12
Clean the brake caliper bracket from dirt and dust. Use a wire brush. Use a brake cleaner.
Replacement: brake pads – Skoda Octavia 1Z5. Tip from AUTODOC:
After applying the spray, wait a few minutes.
Step 13
Treat the brake caliper piston. Use a nylon cleaning brush. Use a brake cleaner.
AUTODOC recommends:
Replacement: brake pads – Skoda Octavia 1Z5. After applying the spray, wait a few minutes.
Step 14
Press in the brake caliper piston. Use brake caliper wind back tool.
Step 15
Treat the brake pads in the area where their surface comes into contact with the brake caliper bracket. Use anti-squeal paste.
Replacement: brake pads – Skoda Octavia 1Z5. Tip from AUTODOC experts:
Make sure the disc surface is clean before installing the pads.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your SKODA Octavia II Combi (1Z5)
View more
What to check when buying a used car | AUTODOC tips